-Be suitable for all kinds of trim sensor with same signal.
-Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
- Cut an 52mm (2 1/16") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge.
- Put the gauge in the hole.
- Using M4 nut and C type bracket to seal up the gauge.
Fixing dimension | 52mm(2") |
Indicating Range | UP-DN |
Signal | 0-190ohm |
Working Voltage | 9-32V(12V/24V) |
Backlight | Red |
Operation mode | LCD display, stepper motor |
Red wire --- Power Positive.
Black wire --- Trim Signal.
Orange wire (backlight) --- Power Positive.
Blue wire --- Power Negative.
Please note: Trim meter can be connected to 12VDC and 24VDC power directly.
Trim Gauge | Trim Gauge | Trim Gauge | Trim Gauge | |
---|---|---|---|---|
size | 52mm | 52mm | 52mm | 52mm |
color | white+stainless steel | black+black | black+stainless steel | white+stainless steel |
1x Trim Gauge
1x Multi-plug socket
1x Installation Instruction