Feature

●APPLICATION: Fits for Seastar pivot / front mount hydraulic steering cylinders on outboard motors, most outboard boats with single or twin engines
●MATERIAL: Precision CNC machined from high quality Aluminum, steel and rubber to ensure high hardness, wear resistance and corrosion resistance
●COMPATIBILITY: Used to repair leaking or weeping cylinder seals. Fits front mount cylinder parts HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755
●NOTICE: Inspect the steering rod itself just making sure there is no severe pitting in the rod or anything that would indicate premature failure of new set of seals. Severely pitted rods will rid up a new set of seals and cause premature failure of the expensive seal job
●SATISFACTION: If youre not 100% satisfied with our Tool Kit, simply return it for a full refund in 30 days.


Description

HC5345 Front Mount Hydraulic Steering CylinderHC5345 Front Mount Hydraulic Steering Cylinder
HS5157 HC5345 Front Mount Hydraulic Steering Cylinder Seal Kit with Pin Wrench for HC5340HS5157 HC5345 Front Mount Hydraulic Steering Cylinder Seal Kit with Pin Wrench for HC5340

Sunluway Front Mount Hydraulic Steering Cylinder Seal Kit is Great for Use in Marine Applications!

It is critical for you to check the cylinder rod to see whether it has scratches, nicks or damages in anyway. Any damages found, the complete cylinder must be replaced. Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering. Do not remove shaft from steering cylinder. Bleeding the system to remove any air, compatible with Seastar Hydraulic Oil HA5340 only. Check for smooth operations and full travel of the cylinder. Check for no leaking.

Compatibility:

  • Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755

Model Reference:

  • Seal Kit for HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland))

HS5157 Front Mount Hydraulic Steering Cylinder Seal KitHS5157 Front Mount Hydraulic Steering Cylinder Seal Kit

Note:

The smallest imperfection on the shiny steering rod will cause a new seal to fail real quick. Remove the internal steering rod and then take some 1500 then 2000 grit wet sand paper and go over the full length of the steering rod (take your time!!). Clean rod up, lube it with hydro fluid and carefully reassemble the steering system.

Package Content:

22

33

33

Seal Glands

Seal Gland Assembly Guide Tool & O rings

Pin Wrench

HS5157 Front Mount Hydraulic Steering Cylinder Seal KitHS5157 Front Mount Hydraulic Steering Cylinder Seal Kit
B08X198TFD TSP-1 Marine Transom Support Plate for Top Bolt Holes, 15" x 2" Bearing Retainer Spanner Wrench & Carrier Retainer Wrench Tool
TSP-2DP Marine Transom Support Plate Fits Lower Bolt Holes, 12" x 2" TSP-1 Marine Transom Support Plate for Top Bolt Holes, 15" x 2" Carrier Retainer Wrench Tool Set for Mercruiser Alpha 1, Bravo 1
Function

Product information