Specification:
Item Type: Tape Maker
Specification: 3pcs/set
Material: Stainless steel + plastic
Application: Industrial
Size: Approx. Yellow 12mm / 0.5in, red 18mm / 0.7in, blue 25mm / 1in
How to Use:
1. Fabrication of cloth strips: According to the width you need, cut a strip of parallel cloth strips at a 45° angle.
2. With the reverse side of the tape maker facing up, insert the fabric strip from the wide opening, and use the tip of the awl to pull the fabric strip out of the front of the tape maker.
3. Fix the front end of the pulled out cloth strip on the ironing board with a positioning pin. While pulling the belt device, bring the iron (not included) close to the front end of the webbing device, so that the pulled out cloth belt is immediately ironed into shape.
Package List:
1x 12mm Tape Maker(Yellow)
1x 18mm Tape Maker(Red)
1x 25mm Tape Maker(Blue)
Note:
After the cloth strip is pulled out with the tape maker during operation, it must be ironed with an electric iron(not included) before it can be used.