Feature

●【 Wood Burning Kit Type 】 AC 110V 100W pyrography machine;Pyrography pen: 2pcs(1pcs for meticulous pyrography, 1pcs for apply colours to a drawing) ;Pyrography nib: 10pcs φ1mm heater strip, 1pcs copper pen head .(★Note:The CD include is not the English instruction ,its the indruduction of pyrography patterns !)
●【 Adjustable Temperture 】 The heater strip normal use temperature 0-800℃ , the use of copper pyrography tips can be baked at 0 - 500℃ temperature rendering, fine rendering .
●【Temperature Control Warnring 】 When adjust temperature of the pen, Please keep the normal temperature range in gray area, do not turn to red area as excessive temperature will reduce the pen’s service life even burn out other units. Appropriate adjustment of temperature is very important, normally the pen is in slight red will be okay.
●【Adwantage of this Pyrography】 This wood burning kit is a professional machine for pyrography ,it has two heating pens can be used at the same time.It has advantages of high-resistance alloy pen tip with high strength at high temperature and not soft, long life of anti-oxidation, carbon deposition, etc
●【Pyrography Use Instruction】 Turn on the switch during using ,then the machine starts up when the indicator light is red.Adjust temperature of the pen ,through the thermostat, slowly adjust the voltage, until the electric wire tip is gray .Within the heat baked pen thermostat, do not make the writing temperature of more than 500 degrees, it is easy to burn the written head, the heat a little red tip keep the normal temperature range in gray area(Do not turn to red area as excessive


Description

Fast shipping with DHL

Parameter:
Voltage: AC 220V 50Hz / AC 110V 60Hz
Total Power: 100W (each pen 50W)
Temperature setting: heater strip 0 - 1000℃; copper pen head 0 - 450℃
Pyrography pen: 2pcs(1pcs for meticulous pyrography, 1pcs for apply colours to a drawing)
Pyrography nib: 10pcs φ1mm heater strip, 1pcs copper pen head
Weight: 3KG
Display: Pointer display

br>How to use:
1.Turn on the switch. Turn the switch on when you use it. Turn it off when not in use. 2.Thermostat, is to adjust the temperature of the pen, the normal adjustment of the temperature in the light gray area, the red zone is high temperature, please try not to transfer to high temperature, This can easily shorten the service life, and may cause the burnout of other components.
3.Electric wire tip of the adjustment, through the thermostat, slowly adjust the voltage, electric wire tip is gray orange red can.
4.Within the heat baked pen thermostat, do not make the writing temperature of more than 600 degrees, it is easy to burn the written head, the heat a little red tip.