Feature
●? Temperature Control - The -60W soldering machine heats quickly, from 0-700 degrees, and precisely controls the temperature. Control the temperature by turning the dial. It heats up in a literal three seconds and cools down in 15 seconds (the wire nibs). After the machine is powered on, the temperature of the writing head can be as high as 450 degrees. Please do not touch it with your hand to avoid scald hand or skin.Keep the pen away from flammable materials to avoid fire
●? Safe and High Quality - ABS engineering plastic shell, toughness, high strength, good insulation, high security and light weigh. Screw locking device to make the connection more secure and heat resisting block the heat conducted from the pen point to the handle. This wood burning kit is a 110V 60W model coming with 2 Burning Pens, 20 Tips, 2 Wood Pen Support Set
●? Quick Heating - In the inlaid pen, tighten the tip of the screw to be loose, and then the tip of the two legs into the copper hole inside the 8 mm, and then use the screws firmly. You don’t have to sit around waiting for the tool to heat up. This wood burning tool warms up in minutes. Suitable for hot carving of wood, gourd, leather, wheat straw, bark, leaves, bamboo, etc.
●? Perfect Gifts - It is a valuable skill that you can use to create art to sell, or make gifts for your friends and family. This 110V 60W wood burning kit makes a great holiday or birthday gift for anyone interested in the art of wood burning and soldering. By having this woodburner, you can express yourself in artistic and financially rewarding ways
●? IMPORTANCE: You can use the double socket at the same time. 20 wood burning tips for various types of burning make your work more interesting. Full set, the accessories are complete, you can start your crafts activities immediately
[Black 2-Pens]
Description
Parameter:
Voltage: 110V with US plug
Power: 110V
Voltage: 60W
Host weight: about 1.4kg
Pen weight: 40g
Installation and debugging
1. Take out the pen holder, loosen the screw on the head of the pen holder and close it .Insert the pen tip into the head and tighten the upper screws with a screwdriver
2. Insert the pen holder into the branding pen interface of the host machine and rotate and tighten it.
3. Turn on the main switch of host power.
4. Turn the thermostat knob until it reaches the trigger point and the voltmeter shows the voltage According to their own habits adjust the corresponding temperature for pyrography.
Matters needing attention：
1. Clean the sponge with water before use to clean the tip of the pen.
2. Generally use half an hour to rest for 20 minutes, so as to the machine good maintenance.
3. After use, please turn off the power and remove the plug!