Feature

●??【Update CNC 3018PRO】2-in-1 CNC 3018-PRO with 7000mW Module is an upgraded version of 3018. Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage.(????:Provide technical support,electronic software/manual)
●??【CNC Engraving】 With an effective engraving area of 300 x 180 x 45 mm, the 3018pro-M can easily accommodate most projects. Control software: GRBL; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
●??【High Precision Module】7000mW tube, built-in cooling fan, with fine heat dissipation effect, high engraving power and long-term available. --Adding Two Shields and a pair of safety goggles protect your eyes from injury.
●??【Offline Controller】 DO NOT need to connect the computer. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan. Note: Please dont use the computer and the Offline Controller at the same time, otherwise it will block the communication.
●??【Wide Application】Suitable for carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other like materials, but can not carve hard metal, jade and other hard materials.??Get technical support??Search"Titoe 3018pro" On Yotube.

[Gray]




[Black]





Description

11

The Titoe CNC 3018Pro with 7000mW Module

Designed for the absolute beginner, the Titoe is a great tool for starting CNC learning. If wood-working is your hobby, you can use it to add features like curved words and exquisite patterns. If you are a student just learning CNC, it can help you engrave models which you are coding and designing.

11

The Advantages of CNC 3018Pro Machine:

  • 2-In-1 Design: Replacing the spindle with a suitable power head, The Titoe CNC 3018-PRO can be used as a CNC Router or a Engraver.Ea
  • Easy to Assembly:All the parts are in the package. It only takes 20-60 minutes to assemble it. Search "Titoe 3018pro" to watch the instructional video on Youtube.
  • Offline Controller: Take control of your 3018-PRO Desktop CNC machine with offline control, provide manual control of your mill without any computer.
  • Upgraded Control Board: Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Case to extend the life of the control board. Self-contained short circuit protection to prevent it from burning due to overload.
  • High Quality and Affordable: Make more with the 80% aluminum body and take advantage of the added stability for milling a wider range of materials.

11

CNC 3018pro Machine with Spindle Module

  • Suitable for carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other like materials, but can not carve hard metal, jade and other hard materials.
  • You will find the cnc 3018 pro is an excellent tool which allows you to try your DIY ideas on an inexpensive platform without the risk of damaging expensive equipment.

11

22

33

11

11

CNC 3018pro Machine with 7000mW Module

  • Suitable for carve wood, plastic, acrylic, PCB CCL, but can not carve metal, jade and other hard materials.
  • If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the 7000mw Module kit to the machine. With this module, it can absolutely give you different ways to unleash your creativity.

11

22

11

11

11

7000mW 7W Module:

  • Wavelength: 450nm
  • Power: 7W
  • Output current: 3A
  • Input voltage: DC 12V
  • Working temperature: 10°-40°
  • Please debug the 7000mW module before use.

Titoe Service Team

11

There might be some difficulties during the set up of the machine. Please allow us to share some tips with you regarding the set up of the machine:

  • (1) Please check if the accessories are complete when you get the package.
  • (2) There are installation videos in the installation package. Please watch the videos carefully before installation.If you cannot download the software from my page, please let us know in time.
  • (3)Software for Control the machine(3Axis)<Driver <Install the driver<Grblcontrol(Candle_1.1.7 )<Grblcontrol (Candle)<Click the "Setting"on the Service part<Com*and Com# for option,the instructions are explained how to choose<Successful installation<Open a file<Move the bit to touch the surface,Pay attention to the location of the origin<Click"ZeroXY,Zera Z"<Click the Open to start work
  • (4)Software for Module(2Axis)<Install the driver<Clickthe "Connect‘’，Move box turn green,if not, click the“Lock logo”on the left bottom<Open a file<Select parameters, it is recommended not to modify<Click the“Arrow Sign" to start work
  • (5)The parameters in the GRBL software have been set specifically, changing them arbitrarily will cause engraving errors.
  • (6) GRBL software and offline controller are only compatible with G-codes such as NC files, TXT files and TAP files. ModuleGRBL software is compatible with G codes and pictures. Use software such as CopperCAM, Inkscape, MeshCAM, Carbide create and MasterCam to create G-code.
  • (7)Welcome to show us your carving works.