Feature
●The flyback transformer can be used both on 110V & 220V
●The 40w flyback transformer only suitable for 40W Co2 laser power supply
●The 40w laser power supply has 1 piece flyback transformer. So you choose 1 piece transformer is good enough.
●There are 2 Models Flyback: Model A and Model B. Please Check the Install Schematic Diagram to make sure it fit your Power Supply.
●Replace DIY part for CO2 Laser engraving cutting machine
[Model B]
[Model C]
Description
Features
- The 40w Flyback Transformer is Used in the CO2 Laser Power Supply.
- The 40w Flyback Transformer only Suit for 40W CO2 Laser Power Supply.
- The 40w Laser Power Supply has 1 Piece Flyback Transformer.
- The Screw is for install fixed on the Laser Power Supply Board.
- If the Co2 laser engrave machine laser power is weak , and it cant cut through any materials. Then adjust the laser power to maximum value. At the same time, please check the machines Current.If the Current is still less than 8 mA. Then you need replace a new flyback transformer for the laser power supply.
Dimension
Appearance Comparison
Photos
|
|
|
|
|---|---|---|
|
|
|
|
