Nylon Bushing Swing Hanger Swingset
Part number: 6" X 3/8;
For: Hardware Playset;
Fits: Playground sh140;
his is a residential light use only swing hanger. Nylon bushing hanger with 3/8” x 6” threaded bolt and washer with lock tight nut. Galvanized to retard rust. This listing is for a PAIR.
Installation: Hangers should be spaced 2 ft from the end of the set and 2 ft a part for each swing. Screw this hanger into your wood set so that the triangle with the nylon bearing is even with the wood. Shaft of the bolt must be completely in wood. If not the stress point will be on the bolt instead of the bearing and can result in breakage and injuries. There should be no more than 2 threads showing. When in use this hanger may squeak and this is normal. Grease or oil bushings if squeaking noises are heard. You will need to use S-hooks or shackles from the chain to the swing hangers. Make sure the S-hooks are closed to within .04 to meet ASTM safety standards. To do this you will need to use our S-hook pliers or a regular pair of channel lock pliers. WARNING: Once the S-hooks have been opened they will have to be replaced to avoid injuries from coming open and/or breaking. Make sure that if you are using shackles they are also tightened.