For the last 30+ years, Carlsons Choke Tubes have been able to grow and improve their line of choke tubes. This has come from patterning tens of thousands of shells, and using all different makes and models of shotguns. By examining patterns and making adjustments to things such as the parallel section, finish, and diameters, Carlsons Choke Tubes are able to provide choke tubes that performs as you would expect in the field and at the range. Over the last few years Carlsons Choke Tubes have grown their product line, and some of this can be attributed to the Electronic Patterning Board (EPB) that we have at our disposal. This technology allows Carlsons Chobe Tubes to see various things such as point of impact (POI), pattern percentage, and pattern density. Using the EPB, Carlsons Choke Tubes are able to get more accurate data. This advantage is passed on to the customer by designing accurate chokes.
Carlson’s Choke Tubes are made from the finest corrosion-resistant 17-4 PH stainless steel available. Most factory choke tubes are made of lessor stainless steel, which equates to a choke that won’t hold up to most steel shot loads or heavy buffered shotshells. Steel shot patterns tighter than lead shot. Generally speaking, you will want to use a more open choke when shooting steel shot than you would with lead.
Patterning your shotgun is very important as every shotgun, choke, and load combination will produce various results. Generally when patterning your shotgun you will want to have a target area that would hold a 30 inch circle. You will want to set your target at the desired yardage you will be shooting at 40 yards is a good start and is widely used in the industry to compare results. Make sure you have a good stance or rest so you get accurate data. Point of aim (POI) of the shotgun is important to recognize. The POI of the gun can be affected by the gun, stance, shooter, choke, or load. Generally 12ga and 20ga choke constrictions follow the chart below.
When patterning your gun you need to keep in mind that lead loads will pattern more open than steel loads in the same constrictions. Steel loads shot through lead constrictions will produce tighter patterns. See below:
30+ YEARS
CHOKE TUBES
PATTERNING
YARDAGE
|
|
|
---|---|---|
WE BACK ALL OF OUR CHOKE TUBES:Carlsons Choke Tubes are CNC milled from solid 17-4, heat-treated, stainless bars for optimum performance and longevity. So you can focus on busting clays and filling bag limits. |
CHOKE TUBES AND GOOD PATTERNS:Most ammo and choke combinations will pattern differently. Using a Performance Carlson’s Choke Tube is a great place to start, but don’t forget to go to the range and pattern your shotgun for the load and choke you intend to use. |
MADE IN USA:Every single Carlsons Choke Tubes is made, right here, in the United States. |