The 2 Watt Load Equalizer adds 2 Watts of load to the system, to make the blinker system with the stock flasher relay operate in the fast blink condition (bulb out) with your LEDs installed. If you want to slow your blinkers down to normal, you will need to add the same amount of Wattage as the OEM bulbs. We make 10 Watt and 25 Watt Load Equalizers for this purpose. The 2 Watt is only useful for motorcycles that come with LEDs from the factory, and some circumstances where you merely wish to get the blinkers blinking fast again. The Stage I Load Equalizer couldnt be easier to install! The device is very small and connects to the blinker wires. Your order will come with detailed instructions and simple tap connectors that do not require any cutting or splicing of the factory wiring! Our Load Equalizers are over designed and over sized for excellent heat capacity. They will not get too hot under normal operation. You wont have any overheating problems with our products! BEFORE CHOOSING A LOAD EQUALIZER TO CORRECT YOUR BLINKER FLASH RATE, BE SURE TO SEE OUR ELECTRONIC LED FLASHER RELAY WITH PLUG AND PLAY CONVENIENCE! ITS THE BETTER AND CHEAPER SOLUTION TO THE PROBLEM!