Feature
●They can be use for and other Rotary Tools,These buffing wheels are used in DIY engraving, grinding, polishing (wood, metal, stone polishing purposes).
●Uses: Trimming, engraving, grinding and polishing of workpieces such as mold/copper/aluminum/metal/plastic/jade/woodUsed in conjunction with electric grinders, hanging mills, electric drills, etc.
●*Usage: This product is widely used especially in industries such as automobiles, motorcycles, molds, metallurgy, casting, electronics, plastics, etc.
●*Scope of application: It is used for polishing and finishing of various complex surfaces and deep holes of metal and non-metal, especially suitable for grinding and polishing of uneven surfaces and sides
[3 x 8mm 5 pcs]
Description
Tips: When using diamond tools, please note the following:
1. When installing a new tool, be sure to test whether the tool is beating. If it is beaten, it cannot be used directly. It must be adjusted so that it cannot be used. Otherwise, the tool will soon wear out and the carved things will not be very smooth. Adjustment method: Use a small wrench that changes the chuck to gently tap the tool handle that rotates at a high speed until the tool is stable. It is forbidden to tap the electronic device. The adjustment method is to release the chuck and turn the tool to an angle or extend and retract it.
2. Be sure to let the water cool (similar to a drop device such as a drip in a hospital). If a dry drill is used, the diamond on the tool head will be graphitized due to overheating, which will soon wear out.
3. When drilling, try to avoid shaking, because shaking will cause partial damage to the tool and accelerate the damage of the entire tool.
4. The speed is as high as possible. It is generally required that the line speed be not less than 10-20 meters per second.
5. Light pressure feeding, diamond tools are used to machine the workpiece by grinding, excessive force, the mill is not easy to remove, tools (especially small tools) are also easy to damage.