Feature
●[3-IN-1 FUNCTION]: Use this 3-in-1 soil pH meter to measure soil moisture, liquid pH value and sunlight level of plant. It can help you to take better care of your flowers & plants.
●[ACCURATE & RELIABLE]: Double sensor probes design strongly enhance the speed and accuracy of detecting and analyzing soil moisture and pH acidity.
●[EASY TO USE]: No batteries needed, just insert the sensor probe into the soil about 2-4 inches to test moisture, pH, sunlight you would like to measure.
●[INDOOR & OUTDOOR USE]: The design of this moisture tester is lightweight and portable, easy to carry around for outdoor use. It is a ideal soil test kit for garden, lawn, farm.
●[NOTE]: Do not use it to test very hard soil; The moisture meter function can only suitable for soil, not for water or other liquid; After use, please wipe clean the probe.
Description
This meter can be used to test the pH and moisture of soil, and light level test.
It can be used in plant cultivation. It is easy to use and is a very useful test tool.
Soil/Liquid pH Meter
Testing Soil
1. Prepare the soil sample for test: Take away all the stones, clod, glass, etc.
2. Tenderly clean the probes with an abrasive soft paper and dry cloth or a toilet paper. Make sure that the probes are clean and dry, then insert the probes into the soil to be tested. If the soil is too dry, wet it.
Testing Liquid
Attention: The tester is not submarine. Only the probes can be inserted into liquid.
1. Prepare the liquid sample in a glass or glass jar.
2. Make sure that the probes are clean and dry.
3. Insert the probes into the liquid.
4. Read the PH value on the bottom scale after 60 seconds.
Note: The insertion depth of the probes should be between 3cm and 15cm. For better measurement accuracy, it is recommended to insert the probes into the soil/liquid to the depth of about 15cm ( about 3/4 of probe length ) if the soil/liquid is thick/deep enough.
Photometer
1.Put the light tester near the plant, the photo-eye ( which is at the center of the meter top ) toward the light source.
2.Set the switch in the " LIGHT " position. Make sure that the photo-eye is not masked.
3.Pick up the position of the pointer on the upper scale.
4.For information about the specific needs of your plants, consult a specialist.
Moisture Meter
1. Set the switch in the " MOIST " position, then insert the probes into the soil between the pot and the plant, the insertion depth of the probes should be between 3cm and 15cm.
Note: For better measurement accuracy, it is recommended to insert the probes into the soil to the depth of about 15cm ( about 3/4 of probe length ) if the soil is thick enough.
2. Pick up the zone of color on the middle scale.
Red ( 1 - 3 )
For plants which should not be too short of water, never add water until the pointer is found in the first half of the red zone.
Green ( 3 - 8 )
For plants which regularly require water, add water once the pointer achieves at the second half of the green zone.
Blue ( 8 - 10 )
Dont add any water, dont water your plant.
Features
Battery-Free
Ready-to-test without any external power source
Humanized Design
Compact and easy to use
Double Sensors Design
Strongly enhances the speed and accuracy of detecting and analyzing soil moisture and pH acidity
Kindly Note
- DO NOT use it to test very hard soil, easy to damage the probes
- The moisture meter function can only suitable for soil, NOT for water or other liquid
- Dont insert it in the soil for a long time
- Clean and wipe the probe after using
