Feature
●【2023 Updated EL50448】EL50448 TPMS relearn tool is an essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires. The upgraded EL50448 is more energy-saving, it is faster, stronger and more sensitive than other TPMS Relearn Tool.
●【WIDE VEHICLE COVERAGE】Works on most Vehicles (Chevy / Buick / Opel / Cadillac etc., from 2006-2022, Cars, SUV, Pickup) equipped with 315 or 433 MHz Tire Pressure Monitor system (TPMS) sensor.
●【EASY To USE】EL50448 can help you reset all tires much easier just with 3 steps. Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall.
●【Save Time& Money】Tire pressure monitor sensor activation tool is simple and fast ,activates the individual TPM sensor with the press of one button easily within 1-2 Mins.Save your almost 20-80$,.Much better than going to the dealer or a tire store just to get your pressure sensors reset.
●【FRIENDLY TIPS】1. When using EL50448, please make sure antenna in correct position. 2. Please make sure the 9v battery in good condition. 3.For Different vehicle EL50448 may need different times to reset all of your tire sensors after rotation. 4. 12 months guarantee, please feel free to contact us if you have any trouble during use.
[Red]
[Orange]
Description
When you need this tire relearn tool?
1. New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.
2. Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.
3. When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.
4. Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems solved, TPMS needs to be reset.
5. Exchanging the winter tires or Summer tires.
How to use the EL-50448 TPMS relearn tool?
1. Set the car in TPMS learning mode. (car horns twice)
2. Starting relearn process from left front tire, point antenna on correct position. Press & hold power button. Once the speaker chirped, move to the next tire.
3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left.
4. After all sensors reseted, the car horns twice means TPMS re-learn finished.
Tips for using
- 9V battery should be in good condition, NEW & fully charged.
- Please make sure antenna fit in CORRECT position.
- Do tire reset outside instead of in the garage.
- Position of tires is also important, Front tires have to be straight.
- Sensors should be original OEM sensors which well programmed.
|
|
|
|
|---|---|---|
How to Get into the Learning Mode?1. Make the gear in P position. 2. Use cruise to choose TPMS re-learn mode in the dashboard settings. 3. Horn will ring once and TPMS indicator flashes, then learning mode has been entered successfully. If equipped, the message center will display the front left (LF) tire. |
Easy and FastTire pressure monitor sensor activation tool is simple, easy to use, activates the individual TPMS sensor with the press of one button. Sensitive sensor chip, run faster. Unleaded and immersion gold process circuit board make it run more stable. |
Portable and HandyMini device, powerful function. With this simple device, you can easily relearn your GM TPMS by yourself instead of going to dealer shop. Save both time and money. |
