Feature(may vary by option.)

●【Solid Brass Construction】made of high grade H59 brass with polishing, multi-layer nickle plated, chrome finishing.Lead free,durable,nice looking and hygiene.
●【Touchless Automatic LED Faucet】 Water automatically flows when put hands infront of the sensor window,and shuts off once move away hands. You dont need to touch the faucet after washing hands.It has LED when water flows, the color can change according to water temperaure; Below 30°c Blue 30 to 41°c green Over 41 °c Red. Be carefull when the red LED flash, and not get scald.
●【Easy Installation】deck mounted or sink mounted, single hole with mouting screws,accessories and instruction manual. Water mixer valve is installed under the sink.With American standard water supply hoses.Suitable deck thickness is 20-45mm, mounting hole diameter is 20-30mm. Note: Before install the faucet, let the water flow for 10 seconds to discharge the impurities in the water pipe. This is very important.
●【Energy saving sensor faucet】sensor powered by 4AA alkaline battery; install the battery in the control box; the battery can be used for 2 years for family use. LED is powered by water pressure. Suggest water pressure is 0.3Mpa -0.6Mpa.
●【Cold and hot water mixer】 faucet comes with water mixing valve to adjust water temperature which should be connected to the control box under deck. Faucet spout can swivel in 360 degree. Its suitable for the daliy cleaning in kitchen.

[LED Goose Neck]




[LED Round Waterfall]





Description

Gangang Automatic Faucet

Automatic Sensor FaucetAutomatic Sensor Faucet

Features:

  • Water saving:water out automatically when you put your hands under the induction zone,water stops when put your hands back.
  • Hands free:touchless,micro-computer control.
  • Soft touch:the aerator with technology of air in water,make water been soft touched and no splash.
  • Energy saving:battery power,4AA alikaline batteries, can be used for around 2 years.

Motion Sensor Faucet

Infrared Sensor FaucetInfrared Sensor Faucet

Faucet PlugFaucet Plug

LED Sensor FaucetLED Sensor Faucet

Faucet Mounting HoleFaucet Mounting Hole

Infrared Sensor Faucet

Factory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop.

This motion sensor faucet will make your washing cleaning and convenient.

Battery Power Touchless Faucet

This faucet is working under a moist environment. The water proof plug makes the it work in safe condition.

LED Bathroom Faucet

Faucet with 3 LED color which changes according to water temperature. LED is powered by water pressure.

  • below 25 degree---blue
  • 26-40 degree---green
  • above 40 degree---red

Single Hole Automatic Faucet

This is a single hole faucet.The fixing stem length is 70mm,suitable deck thickness is 35-45mm.

The stem diameter is 20mm,suitable deck mounting hole diameter is 20-30mm.

Faucet ParameterFaucet Parameter

Automatic Faucet Parameters

  • Power Supply:DC 6V
  • Battery Type:4AA alkaline Battery(not included),can last for 2 years for family use
  • Sensoring Distance(factory setting):15cm
  • Pipe Diameter:G9/16"(American standard)
  • Suitable deck thickness: 35mm-45mm
  • Suitable mounting hole diameter:20mm-45mm
  • Flow Rate:8L/Min
  • Water Pressure:0.05-0.7Mpa
  • Switching Time:less than 0.7s
  • Low Battery Indicator:Red Led Flash

Faucet Package ContentFaucet Package Content

Automatic Sensor Faucet Package

Gangang Faucet includes all the accessory for installtion.

  • 1x Brass Faucet(chrome plated)
  • 1x Water Mixing Valve(Chrome)
  • 1x Control Box (battery not included)
  • 3x Flexible Water Pipe(Americal Standard)
  • 1x Instruction boox

How to install the faucet?

Ganang Faucet InstallationGanang Faucet Installation

Gangang Sensor Faucet Installation Steps:

Before Installation, you may need these tools: electrodrill,screwdriver,hammer,spanner,pencil.

Install the faucet according to the following steps:

  • Step 1: Mounting the faucet on the deck and fasten the nuts on under the deck.
  • Step 2: Put 4 AA alkaline battery in the battery case (batteries are not included in the package).
  • Step 3: Fixing the control box on the wall.
  • Step 4: Connect water mixing vale to the control box (mixer valve outlet to control box inlet).
  • Step 5: Connect the water hoses (cold water hose marked blue, hot water hose marked red, mixing water hose without color).
  • Step 6: Connect the sensor signal wire