Feature

●This 60A solar charge controller compatibility with 12V 24V 48V system voltage. Fully 3-Stage PWM charge (Boost,Equalization,Float), Parameters adjustable ,Over-coltage protection ,Low-voltage protection ,Max solar panel input 12V(750W)/24V(1500W)/48V(3000), USB output 5V 2A charge your electronic devices .
●LCD display parameters about PV/Battery/Load charge and discharge. Adjustable Floating voltage/LVD/LVR/Load Timer according needs for this charge controller.Add Features: Charge and Discharge Current,Charge and Discharge energy recording
●This 60a solar charge controller fit for Lead-acid batteries(Sealed、GEL(AGM)、Flooded) with mutiple load mode, light and timer controller.
●For protecting the lifespan of your battery, once the voltage of battery drop below setting data 11V (Adjustable 9V-12V), the solar controller will stop discharging automatically. Once the voltage of the battery reach setting data 12.6V (Adjustable 11V-13.5V), the solar controller will reconnect the output automatically.
●PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge /short-circuit /open-circuit / over-load /over-charging protection. more safe for home, industrial,commercial etc.(Note:Please follow the Installation Steps to connect your solar system units.)

[60A |  12V  & 24V  & 48V]




[40A |  12V  & 24V]




[20A |  12V  & 24V]





Description

GCSOAR 60A Solar Charge Controller 12V 24V 48V Auto Work PWM 3 Stage Charging Solar Panel Regulator Charger Adjustable Parameter LCD Display for Leaded,Gel(AGM),Flooded Type Battery (60A)

Technical Data:

  • Model: GCLT4860
  • Brand: GCSOAR
  • Max charge current: 60 Amps
  • Sytem Voltage: 12V, 24V, 48V auto work
  • Max PV open circuit current: 100V
  • Max input solar panel power: 750W for 12V battery system ; 1500W for 24V battery system; 3000W for 48V battery system
  • Suitable batteries: Sealed, GEL(AGM), Flooded, User .(AGM default parameters setting same as GEL , or more accurate parameters (battery factory advice) setting by USER type).
  • PWM 3 stage charging :Float 、Boost、Equalize
  • Temperature compensation :-24mV/℃ for 12V system
  • USB output: 5V/2.4A
  • Working Temperature: -20℃~+55℃
  • Terminal Scale: 28--10AWG
  • Waterproof Grade: IP32
  • Dimension :186*105*42mm
  • Weight: 0.52kg

Package :

  • 1X 60A solar charge controller
  • 1X Manual (English)

connect stepsconnect steps

Installation Steps :

  • Connect the system in the order of >> 1.battery ;>>2.Load;>>3.Solar Panel Array .(In accordance with connecttion diagram)
  • Disconnect the system in the reverse order >>3.Solar Panel Array ;>>2.Load; >> 1.battery.

Note :

  • Battery must be connected first ! DO NOT connect any inverter/wind/Alternator or Charger into solar charge controller directly ! You should connect them with battery and add fuse .
  • If there is long distance between PV array and controller or between controller and battery, Bigger size wires can be used to reduce working voltage drop and improve performance. (Recommended wire size is only for reference.)