Feature

●13mm male threaded inlet connection; Total Valve Size (L*W): 35 x 17mm (1.38" x 0.67")
●This air compressor/tank pressure safety relief valve is a safeguard to protect the compressor from back pressure
●It is mainly installed in small air compressor systems, gas storage tank, air receiver tank, and other related applications
●Thread the pressure release valve into the manifold and use a wrench to secure (Add additional sealant if necessary) (Always depressurize the tank before servicing an air compressor)
●Metal construction and stainless steel spring for corrosion resistance and lasting performance


Description

What Is a Safety Valve?

The safety valves, also called pressure relief valves, which are a critical part for the air compressor system, follow a very simple mechanism. They can hold the pressure of compressed air systems on a stable level. The pressure relief valves control and limit the pressure build-up in a system by automatically opening and closing. When the pressure is loaded over the limitation of safety valve, the valve will open and release the gas and decrease pressure. They are suitable for low capacity pressure relief applications.

Solid Construction & Long-Lasting

Metal body, stainless steel spring

Suggestions for Installation

Thread the safety valve into the manifold and use a wrench to tighten.

Always depressurize the tank before maintaining the air compressor.

Check your safety valve at least once a month to see if it is in good condition.