Feature

●【Precise Cutting】:This plastic cutting machine is carefully designed with scales on all four sides making it easy for you to accurately measure each piece of material the 0.01 inch heating wire design allows for more precise cutting and smaller errors reduces losses and saves costs
●【High Efficiency】:This high-power foam cutting equipment has the function of wire cutting which can provide fast accurate flat cutting and clean edge sealing it can achieve higher efficiency and higher output which is more in line with your needs
●【High Quality】:This electric foam cutter is made of high-quality multi-layer panels and stainless steel which is sturdy and durable it has excellent rust prevention wear resistance is not easily deformed can be used for a longer time and does not require frequent replacement
●【Adjustable Support】:The angle of the heating wire cutter bracket can be adjusted to change the position of the wires to adapt to different scenes and cut materials of different shapes more suitable for your use in various scenarios achieving different effects
●【Easy to Install】:Due to its simple structure and complete accessories this product can be easily installed in a short period of time we are also equipped with complete instructions for use allowing you to quickly get started using it by following the instructions


Description

Application

The foam cutting machine is used to cut foam, sponge, pearl cotton, and other hot-melt materials with a melting point below 350℃. It can cut angles, cylinders, sharp cones, rings, tapers, straight lines, and other shapes.

How to Install

1. Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.

2. Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.

3. Pull out the heating wire about 30cm/11.81in from the wire wheel.

4. Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machines bottom. It should not fall off.

5. Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

Specification

Material: Multi-layer Panel and Stainless Steel

Color: Light Blue, Silver

Input Voltage: 100-240V AC

Output Voltage: 18V/4A DC

Power: 72w

Adjustable Temperature Range: 0-500°C/0- 932°F

Cutting Height: 0-25cm/0-9.84inch

Heating Wire Diameter: 0.28mm/0.01in

Cutting Width: 0-28cm/0-11.02in

Worktable Width: 33cm/12.99in

Workbench length: 39cm/15.35in

Packing Size: 44*38*10cm/17.32*14.96*3.93in

Gross Weight: 3.5kg/7.7lbs

Net Weight: 3kg/6.6lbs

Package Included

1* Worktable

1* L-shape Conductive support

1* Guiding Rule

1* Circular Die

1* Angle Board

1* Adapter

1* English Manual