Description
This Practical Foam Cutting Machine Allows Fast and Precise Cutting of Foam, Saving You a Lot of Time and Effort. It Is Suitable for School Projects, Artists, and Factories to Make Billboards, Crafts, and Molds. This Tool Offers a Great Way to Unleash Your Creativity. It Will Be the Ideal Choice for You!
Details
Guiding Rule: It Is Equipped with a Stainless Steel Guiding Rule to Assist You in Making Straight Cuts. the Side Fixing Nuts Hold It Firmly to the Table and Prevent It from Shifting
Wire Storage Wheel: the Large Wire Storage Wheel Can Store up to About 20m/65.61ft of Heating Wire, so You Can Cut for Longer Periods of Time at Once Without Having to Replenish the Wire Frequently.
Led Display: the Adapter Has an Led Display That Shows the Voltage Value in Real Time for Better Control of the Cutting Process.
Circular Die: the Circular Die Assists in Round Cutting and Produces a More Regular Circle, Which Makes Cutting Easier.
Adjustable Feet: There Are Four Adjustable Feet on the Bottom of the Worktable to Ensure Stability Even on Uneven Surfaces. at the Same Time, It Prevents the Table from Being Scratched.
Application
The Foam Cutting Machine Is Used to Cut Foam, Sponge, Pearl Cotton, and Other Hot-melt Materials with a Melting Point Below 350℃. It Can Cut Angles, Cylinders, Sharp Cones, Rings, Tapers, Straight Lines, and Other Shapes.
How to Install
1. Take out the Semicircular Angle Board, Align Two Holes on the Angle Board with Two Holes on the Worktable, and Tighten Them with Screws.
2. Take out the L-type Stainless Steel Square Pipe Support, and Align Two Holes on the Pillar with Two Holes on the Angle Board. Put on the Bolt, Cover the Copper Nose (Copper Nose Is Conductive Zero Line, and Very Important), and Tighten the Nut.
3. Pull out the Heating Wire About 30cm/11.81in from the Wire Wheel.
4. Thread the Heating Wire Through the Small Hole of the Worktable, and Then Make a Ring on the Heating Wire and Hang It on the Spring at the Machines Bottom. It Should Not Fall off.
5. Rotate the Aluminum Alloy Wire Wheel on the Bracket to Tighten the Heating Wire. the Heating Wire Is Moderately Tight and Naturally Elastic.
Specification
Material: Multi-layer Panel and Stainless Steel
Color: Light Blue, Silver
Input Voltage: 100-240v Ac
Output Voltage: 18v/4a Dc
Power: 72w
Plug: Us Standard
Adjustable Temperature Range: 0-500°C/0- 932°F
Cutting Height: 0-25cm/0-9.84inch
Heating Wire Diameter: 0.28mm/0.01in
Cutting Width: 0-28cm/0-11.02in
Worktable Width: 33cm/12.99in
Workbench Length: 39cm/15.35in
Packing Size: 44*38*10cm/17.32*14.96*3.93in
Gross Weight: 3.5kg/7.7lbs
Net Weight: 3kg/6.6lbs
Package Included
1* Worktable
1* L-shape Conductive Support
1* Guiding Rule
1* Circular Die
1* Angle Board
1* Adapter
1* English Manual
All Accessories for Use
Notes
1. Please Read the Manual Completely Before Installation and Use, and Pay Particular Attention to the Safety Instructions Included. Check Whether the Product Accessories Are Complete, If Missing, Please Contact Customer Service in Time.
2. Do Not Touch the Heating Wire of the Cutting Machine When the Power Is on. Keep a Certain Distance from the Heating Wire. If Necessary, Wear Gloves to Avoid Scalding. the Heating Wire Should Not Be Too Red, Otherwise, It Is Easy to Break, and the Life of the Adapter Will Be Affected.
3. Please Use the Product in a Ventilated Environment. Children Need to Use It Under the Supervision of Adults.
4. Please Turn off the Power When the Product Is Not in Use. Long-time Idle Burning May Cause Damage to the Machine.
5. Please Note That It Is Not Suitable for Fireproofing Materials.
6. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.