[US Plug US Plug]

1. The cutter heats up quickly, very convenient to use.
2. It cuts the foam smooth and fast, seals the edges clean, and leaves no debris.
3. Ergonomic design handle with start switch that make it easier to operate, comfortable to hold.
4. It features over-voltage protection, over-current protection and overheating protection. Automatic power-cut after overload, increased service life.
5. Perfect for polystyrene foam cutting, carving and write words on the foam.

Spec:
Features:
The cutter heats up quickly, very convenient to use.
It cuts the foam smooth and fast, seals the edges clean, and leaves no debris.
Ergonomic design handle with start switch that make it easier to operate, comfortable to hold.
It features over-voltage protection, over-current protection and overheating protection. Automatic power-cut after overload, increased service life.
Perfect for polystyrene foam cutting, carving and write words on the foam.
Specification:
Model: AIK-50
Material: - alloy
Weight: 245g/8.6oz
Power: 24W
Normal temperature resistance: 20
Maximum temperature resistance: 1500℃
Pen Point Length: 20cm/7.9inch
Voltage: 110-250V
Plug Type: UK Plug
Product Usage Information:
There are some errors in the length of the pen tip due to different factory batches
Work continuously for no more than 0.5 hours, accumulatively no more than 2-3 hours
Pen power supplies of different lengths cannot be mixed. Each heating pen has its own independent power. Mixed use is either not hot or will burn.
1. The heating tube of the cutting pen can only be bent once, not repeatedly at one point. Bending repeatedly at one point may cause breakage
2. Because of its special structure, the cutting pen can only cut medium and low density foam, and cannot cut materials other than foam. It is not suitable for high density or batch cutting.
3. Continuous cutting does not exceed half an hour, the power supply of the