Feature(may vary by option.)

●[BASIC INFORMATION]: Power supply: AC 110V 50HZ, Maximum power: 200W, Maximum temperature: 500 degrees, Body weight:600g. (We also can supply the 220V and if you need, please leave us a message, or we will only send you the 110V one!)
●[PACKAGE INCLUDE]: Large Slotting Board Kit: Heat cutter*1, 15cm straight blade*1, 30cm flexible blade*1, large slotting board*1, hard plastic case*1, hex wrench*1, cleaning brush*1.
●[PRODUCT USAGE]: It is mainly used for cutting and grooving of EPS foam; on-site construction of indoor and outdoor insulation of buildings. Cutting operation of XPS extruded board.
●[PRODUCT FEATURES]: Continuous operation for long hours and greatly save your time! Suitable for on-site construction; fast heating, adjustable temperature and light weight. Ergonomics handle allows you to use it with one hand, making it easy and effective to do your project. Also, it prevents your hand from being strained or tired.
●[QUALITY COMMITMENT AND CUSTOMER SERVICE]:One Year Warranty! Were sure that you will fall in love with this DIY craft tool. Contact us freely if you have any problems!

[With large slotting board]




[Full Set]




[With small slotting board]




[With straight blade]




[Flexible blade]





Description

The pursuit of excellence, quality first, integrity-based

11

UPGADE Air Cooled Hot Knife Foam Cutter

Advantage

  • The First Hot Knife with Air-cooling System!
  • Add 4 Porous Air Vent ensure better heat dissipationcan, the First Continuously Operated Hand-Hold Hot Knife!
  • It is 2 Times Faster than all of existing hot knife for cut EPS foam board!

Warm Tips:

1.Please read the operating instructions and fully understand before operation.

2. Always use this tool in a ventilated environment.

3. Do not burn residual debris on the blade or dry long blade, otherwise the blade will bend

Features:

1.Air Cooled Electric

2.4 Porous Air Vent

3.Continuous Use

4.Quick Heating Up1000°F

5.16 Heat-intensity Scales

Specification：

  • INPUT: 110 Volts
  • OUTPUT: Max. 190 Watts
  • Continuously Operation is workable
  • WEIGHT: 600 g
  • LENGTH: 340mm
  • WIDTH: 44mm
  • TEMPERATURE: 500℃(1000°F）

Do your Foam Cutting now, DIY your Christmas decoration or make it as a Thanks giving Day GIFT!

11

22

33

Specification：

  • INPUT: 110 Volts
  • OUTPUT: Max. 190 Watts
  • Continuously Operation is workable
  • WEIGHT: 600 g
  • LENGTH: 340mm
  • WIDTH: 44mm
  • TEMPERATURE: 500℃(1000°F）

Warm Tips:

  • 1.Please read the operating instructions and fully understand before operation.
  • 2. Always use this tool in a ventilated environment.
  • 3. Do not burn residual debris on the blade or dry long blade, otherwise the blade will bend

UPGADE Air Cooled Hot Knife Foam Cutter

  • The First Hot Knife with Air-cooling System!
  • Add 4 Porous Air Vent ensure better heat dissipationcan, the First Continuously Operated Hand-Hold Hot Knife!
  • It is 2 Times Faster than all of existing hot knife for cut EPS foam board!

Product information