Feature(may vary by option.)
●【HIGH QUALITY MATERIAL】Table foam cutter is made of fireproof density board + alloy, working plate is about 15 x 23, max. cutting height is about 8. Extra wire could be available and replaced, brush to clean the hot wire, screwdriver to install and remove wire from the unit.
●【360 DEGREE ADJUSTABLE】With the regulator, the support could adjust 360 degree to let foam easily to cut, and it could work consistently. This foam cutter cut foam, sponge and also cut round shape (Dia.= 13.4 / 340mm).
●【TEMPERATURE ADJUSTABLE】With 122°F-572°F adjustable temperature, heat up to approximately 300 degrees Fahrenheit under one minute. Heating wire temperature can be adjustable, cutting different density and material need to adjust the appropriate temperature cutting.
●【WIDE APPLICATION】Cutting foam, sponge, pearl cotton, KT board, etc. Craft DIY, model making , geometry models, commercial artwork, art piece creation, foam carving, geometry models, perfect for both home and school.
●【INSTALLATION STEPS】Install the pillar, tighten the screw; Install the demension ruler; Release the wire, make the wire pass through the hole; And then pass through the board hole, and let it buckle in the spring; Turn on the power switch.
[15 X 23 ]
[31 X 15 ]
[15.4 X 11 ]
Description
Specifications:
- Item Name: Table foam cutter
- Color: Black
- Material: Fireproof Density Board + Alloy
- Voltage: AC110V
- Power: 24W
- Working plate: 15 x 23 (38cm x 58cm)
- Max. Cutting Height: 8/20cm
- Temperature Adjustable: 50℃-300℃/122°F-572°F
- Application: Cutting Foam, Sponge, Pearl Cotton, KT Board, etc.
Features:
- Product Size: 15 x 23 (380mm x 580mm)
- Extra wire could be available and replaced.
- With adjustable temperature, heat up to approximately 300 degrees Fahrenheit under one minute.
- This foam cutter cut foam, sponge and also cut round shape (Dia.= 13.4/340mm).
- With the regulator, the support could adjust 360 degree to let foam easily to cut. And it could work consistently.
- Brush to clean the hot wire.
- Screwdriver to install and remove wire from the unit.
Note:
1. Heating wire temperature can be adjustable, cutting different density and material need to adjust the appropriate temperature cutting.
2.Usually, the electric wire is not red or slightly red is suitable. It can not be cut if the wire is very red.
3. When cutting, the wire temperature is very high, should keep away from flammable and explosive materials.
4. When complete cutting, please cut off the power in time.
5. Some material may have a smell when cutting, it is recommended to cut in the ventilation environment.
6.It is recommended to wear work glove when cutting.
Package Included:
- 1 X Table Foam Cutter
- 1 x Power Cable
- 1 x Cutting Wire