Feature(may vary by option.)

●1.Specification: Voltage: 110V; Frequency:50/60Hz; Power: 150W; Speed: Adjustable; Temp.of blade:6-8 seconds heating up 500°C; Length of the Wire: 3M; Dimension: 24*4.5*3.5cm; Packing Size: 28*23*8.5cm; Gross Weight: 1.1kg.
●2.Accessories: electric foam cutter*1, 15cm straight blade*1, 30cm flexible blade*1, large slotting board*1, the well-quality plastic box*1.
●3.Application: hot knife cutter, used together with different type blades, can be used for cutting different materials.
●4.Intermittent operating for the tool, suggest that loosen the switch for a second after 30 seconds’ working.
●5.Blade Installation: 1, Use the Allen Key loosen the screw in the copper clamp.2.Insert two pins of the blade in to the copper clamp, and then tighten the screw, make sure that the clamp is touch enough with the blade, if not the blade will not work well.

[Heat Cutter]

Description

Description:
This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner.
The fabric hot cutteris a wonderful tool with good cutting effect.
There is no rough burr after cutting.
The heat cutter tool is power saving and easy to operate.
The temperature cutting blade can go up to 500°C for which rising to 500°C it takes within 6-8 seconds.
Also, the structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.