Feature
●Package Includes: Long Tip 4.2"(10.7cm),6.7"(17cm) Hot Wire Tip, Engraving Tip, Safety Stand, 42inch(107cm) Replacement Wire and Foam Marker. Metrics are sharpened with sheer vigilance to assist you with the most difficult cuts while enabling you to work on both large and small foam-based projects with ease
●Safety: In order to comply with the safety and sustainability standards our handle has a UL approved certificate and a secure power switch for safety purposes as the tip heat up quite fast. Overheat protection, equipped with a stand to place the heated needle for your safety and convenience
●Versatility: This device was created to apply patterns and designs on a wide variety of foam types: Expanded Polystyrene (Eps) with a density of less than 22kg/m³, Pearl Cotton with a density of more than 20kg/m³, Kt Board with a thickness of less than 6 mm
●Enhancements: Rather than manufacturing a product from scratch, we improve our products by thoroughly analyzing the similar products available in the market, our tool incorporates a longer tip to be used as a saw for enhanced efficiency
●User instruction: 1) Please adhere to the recommended usage time of 40 minutes maximum without continuous operation. 2) Exercise caution and avoid applying excessive pressure while cutting. 3) Ensure to clean the tool thoroughly after each use
Description
User Instructions for Foam Cutting Tools
Continuous use beyond this duration may lead to overheating, potentially affecting the tools performance and longevity. Allow the tool to cool down for a few minutes before resuming use.
The foam cutting tool is designed to work efficiently with minimal force. Applying too much pressure may not only compromise the quality of your cuts but also strain the tools motor and components. Allow the tools sharp blade to do the work for you.
Cleaning the foam cutting tool is crucial for maintaining its effectiveness and longevity. Use a soft brush or cloth to remove any residue or debris from the blade and other components. This will prevent material buildup that could impact the tools performance over time.
Additional Tips for Optimal Performance:
- Safety First: Always wear appropriate safety gear, including safety glasses and gloves, to protect yourself during operation.
- Suitable Work Surface: Use a stable and flat work surface to enhance control and precision while cutting.
- Material Compatibility: Confirm that the foam cutting tool is suitable for the type and thickness of foam you are working with.
- Storage: Store the tool in a dry and cool place when not in use to prevent damage and ensure a longer lifespan.
