Feature(may vary by option.)
●The Sludgeboss float switch is rated to directly control motors of up to ½ Horsepower (or 13 Amps) at 120 or 220 Volts AC for non-continuous pump operations, and up to 13 Amps for 12V DC motor loads. MANAGE WASTEWATER LEVELS with Sludge Boss Septic Tank Floats. These float switches work with your sewage pump to detect the levels of viscous liquids and suspended solids in tanks and containers.
●RUGGEDLY CONSTRUCTED of non-corrosive polypropylene and PVC-jacketed wires, IP68-rated Sludge Boss Sewage Pump Switch Floats withstand non-combustible fluids in temperatures from 32°F to 140°F.
●SELF-ORIENTING DESIGN makes installation hassle-free with no tether or cable weight needed. Available in 16-, 20-, 33- and 100-foot lengths, Sludge Boss is compatible with many sewage pump systems.
●HONEYWELL MICRO SWITCH built into Sludge Boss Sewer Pump Tank Floats is rated for 100,000 operations. Confidently control effluent and wastewater levels in large water tanks, reservoirs, and sumps.
●MERCURY-FREE and IEC and CE rated Sludge Boss Hold Tank Float Switches are non-toxic and environmentally friendly. They are suitable for use with septic tank pumps up to 1/2 HP at 120 volts or 220 volts.
[99 Foot Cable]
[15 Foot Cable]
[20 Foot Cable]
[33 Foot Cable]
[Piggyback 20 Foot]
[Piggyback 30 foot]
Description
Reliable Pump Operation
The WaterBoss Float Switch for water tanks, grinder pumps and sump pits minimizes the potential for water damage and burned up pump motors with little to no oversight after installation. With its snap action design, this water sensor detects the level of liquid within a tank and acts as a switch to activate and deactivate the pump motor.
Rugged & Reliable
Sump Alarm’s SludgeBoss is built to withstand prolonged exposure to harsh conditions.
- Chemically resistant heavy-duty PP casing
- Non-corrosive stainless steel ball
- Self-lubricating armature
- PVC jacketed cable
- Rugged and dependable
- IP68 waterproof
- 32*F to 140*F
Know the Flow
Unlike tethered float switches, the SludgeBoss is made to hang above the liquid level and it will it orient itself. It is suitable for managing wastewater levels, especially in applications including sewage, suspended solids, and viscous liquids.
- Self-orienting float switch ensures proper orientation even when submerged in challenging conditions
- Single Pole, Double Throw switch, allowing it be used for either emptying or filling operations
- Wire lead configuration
- Mercury Free Float Switch
- Honeywell microswitch rated for 1M+ cycles
- For ½ HP or 13-amp non-continuous motors
- Heavy-duty IP68 waterproof construction
- Little to no oversight after installation
Rugged Construction
Sump Alarm uses premium components to make a frustration-free sump pump float switch that withstands exposure to extreme climates and harsh conditions. These include a heavy-duty float casing that is chemically resistant; corrosion resistant ball with self-lubricating armature; PVC jacketed tether; and a molded polypropylene cable gland.
Rated for Over 1M Cycles
The SludgeBoss has an internal Honeywell microswitch that has been tested and rate for 1 million operations. Configured for emptying or filling uses. SludgeBoss with its wire lead ends for direct control of motors will activate your pump to run until liquid has drained to the appointed level. Then the switch will return to the off position.
Easy Installation
Mounting of the Float is easy as it does not have to be tethered, and you can use your Sludgeboss Float to use right away, without any specialized knowledge or complicated tools. Sludgeboss Float switches are perfect for monitoring a Septic Tank, and it ensures frustration-septic level monitoring and control.
Wide Compatibility
The Sludgeboss Series Sewage Pump Float Switch provides automatic control of emptying operations by motors that are one-half horsepower or 13 amps at 120 volts AC. Configured as Normally Open or Normally closed, switch is a dependable and long-lasting alternative to a stem-mounted vertical float switch for non-continuous pump operations.
A Proud American Company
While Sump Alarm float switches are manufactured in Argentina, we conduct quality control checks here in the USA to ensure that your product will work as intended. With headquarters in St. Louis, Missouri, we also are available to offer any guidance you may need.
|
|
|
|
|
|---|---|---|---|---|
| 3100 Series Float Switch | 2359 Series Float Switch | 3120 Series Float Switch | 2368 Series Float Switch | |
| Customer Reviews |
342
|
713
|
265
|
265
|
| Price | $31.99 | $24.99 | $79.99 | $75.99 |
| Cord End | PiggyBack | Wire Lead | PiggyBack | Wire Lead |
| Liquid Rating | Clear Water to light amounts of suspended solids | Clear Water to light amounts of suspended solids | Septic/Sewage | Septic/Sewage |
| Voltage | 120V AC | 120,240VAC, 12VDC | 120V AC | 120,240VAC, 12VDC |
| Float Switch Cord Length(s) | 10ft | 6,10,16,33,100ft | 16,33ft | 16,20,33,100ft |
| Common Applications | Sump Pit, Water Tank, Grinder Pit | Sump Pit, Water Tank, Grinder Pit | Grinder Pit, Septic, Sewage | Grinder Pit, Septic, Sewage |
| Mercury Free | ? | ? | ? | ? |
| Self Orienting | Tether to discharge pipe | Use provided cable weight, or tether to discharge pipe | ? | ? |
| Operation | Emptying | Emptying or Filling | Emptying | Emptying or Filling |