Oxford Supply Co specializes in traditional Nitrocellulose Lacquer for guitar builders, finishers, DIY’ers, kit builders, refinishers and repairs. Our nitro is matched to some of the most classic guitar finishes from Gibson, Fender and others. All aerosols come with two tips under the cap: White Fan Tip ? Produces a wide vertical fan pattern which mimics a spray gun, atomizing the lacquer at a very fine level. This tip is preferred for most applications for its consistent output, easy of use, and quick coverage. Recommended for spraying Sealer, Primer, Clear Coats and solid colors. Red Cone Tip ? Delivers a more focused, traditional, circular aerosol pattern. Very useful for spraying hard to reach areas like cutaways. Also allows for more control in spraying patterns such as sunbursts or headstock faces. These items are only available to ship to the United States and Canada. Application guidelines: Mix well prior to use. Contents may settle over time, stirring will remedy. Lacquers may be reduced with Lacquer Thinner between 20-40% if desired. Spray at room temperature 68° to 78°F (20° to 26°C). Relative Humidity should be lower than 60% to avoid blushing/cloudiness. Spray in a well-ventilated area with a proper respirator.