●?Fitment:for Acura ILX 2013-2020, for Acura MDX 2004-2013, for Acura RDX 2007-2018, for Acura TL 2004-2014, for Acura TSX 2004-2014, for Acura ZDX 2010-2013, for Honda Accord 2003-2020, for Honda Accord Crosstour 2010-2011, for Honda Civic 2014-2020, for Honda Crosstour 2012-2015, for Honda CR-V 2008-2020, for Honda HR-V 2019-2020, for Honda Insight 2019-2021, for Honda Odyssey 2005-2021, for Honda Pilot 2009-2021, for Honda Ridgeline 2006-2020 ●OE Number: 81653-SDB-A71. Please double check the part number of your own switch. Position: Driver Side ●Function: The seat switch is placed on the front left driver side and is used to control or adjust the seat position to move up and down or back and forth, improving the safety and comfort of the drivers seat position. ●Material: The seat switch is made of waterproof plastic material with stable performance, good reliability, and long service life. ●Easy to Install: Directly replace the damaged power seat switch with just a few tools and a few minutes of your time.
Description
Feature:
Durable plastic material, proper fit, and long service life.
The car must be in the status of flameout when installation.
Please allow slight dimension difference due to different manual measurements.
Please make sure your car model and OE number before purchasing.
This is a non-OEM product, accessory only!
Specification:
OE Number: 81653-SDB-A71
Type: Power Seat Switch
Color: Black
Material: Plastic
Size: 17x4.5x3.6cm / 6.69"x1.77"x1.42"(L*W*H)
Hole Size: 5mm / 0.20"
Fitment:
for Acura ILX 2013-2020
for Acura MDX 2004-2013
for Acura RDX 2007-2018
for Acura TL 2004-2014
for Acura TSX 2004-2014
for Acura ZDX 2010-2013
for Honda Accord 2003-2020
for Honda Accord Crosstour 2010-2011
for Honda Civic 2014-2020
for Honda Crosstour 2012-2015
for Honda CR-V 2008-2020
for Honda HR-V 2019-2020
for Honda Insight 2019-2021
for Honda Odyssey 2005-2021
for Honda Pilot 2009-2021
for Honda Ridgeline 2006-2020
Installation Step:
Remove the seat trim panel to gain access to the backside of the power seat switch.
Check the power seat switch inputs to make sure the switch has power and ground.
Supply power and ground to the power seat motor (bypassing the power seat switch).
Remove the switch connector. Remove the power seat switch from the trim panel.
Install a new power seat switch.
Connect the power seat switch connector.
Reinstall the trim panel and power seat switch onto the bottom of the seat.