Condition: 100% Brand New
Item Type: Radiator Cooling Fan Relay Kit
Material: Plastic
Application: Works for 7/8 inch Fans, 10/12/14/16/inch Fans
How to wire Single Terminal Fan Thermostat Switches:
1.These switches should be used in conjunction with a relay.
2.The switch should operate the relay and the relay should provide power to the fan since an electric fan typically draws a lot of current. When the switch closes to ground (within 170-210°C) the relay is energized and powers the fan. And the switch will open and break the ground circuit when the temperature drop.
3.The relay de-energizes and cuts power to the fan.
Installation Precautions:
(1) Turn off the engine, and after the water in the engine radiator has cooled to room temperature, replace with a new cooling fan temperature switch.
(2) Please avoid using external high temperature sources after installation.
(3) When installing, avoid sprinkling water on the surrounding automobile parts.
Direct Connect:(Fan will Opera when the ignition is on)
1.Attach the positive fan motor wire (Blue)to a 12V positive ignition controlled source
e.g. box.
Note:We recommend the use of a 20 Amp inline(not included) for each fan.
2.Attach the negative fan motor wire(Black) to a suitable ground.
Note:Connect directly to battery negative terminal if possible
3.Reconnect the battery
Relay:
Black Wire: Thermostat
Blue Wire:Fan (Blue Wire On Fan)
White Wire: AUX Side On Circuit Breaker
Red Wire: Ignition Switch W/30A-40A BUSS
Package List:
1 x Connection Cable
1 x Water Temperature Sensor
1 x Relay
1 x Overload Protector
7 x Wiring Insulation Terminal