Connect the Forge Burner to the Melting Furnace
1. Put the coupler (the bell shape flame outlet) inside the hole
2. Slide the steel pipe through the hole
3. Screw into the coupler by thread
- Use the ceramic insulation to seal the gap between burner and furnace, which could prevent the fire splash
- Pull the burner outward after the burner installed, keep the burner head immersed in the caremic insulation, which could protect the burner head and ensure the crucible can be placed in the furnace properly.
The burner head is connected by thread, which could be replaced directly if it were damaged during long time smelting.