●FAHUNG replacement knife blade tip is a deep cutting blade tip made for knife blade housing use specifically with the Maker 3/Maker cutting machine. ●FAHUNG replacement knife blade kit includes a knife blade tip and 1 pcs white silica gel changing cap. (Knife Blade Drive Housing Sold Separate) ●Our knife blade replacement tip is customized specifically for thicker materials like Balsa-1/16" (1.6 mm), Balsa-3/32" (2.4 mm), Basswood-1/32" (0.8 mm), Basswood-1/16" (1.6 mm), Chipboard (1.5 mm), Heavy Chipboard(2.0mm), Tooling Leather and more. ●FAHUNG replacement sharp knife blade tip is made of high-quality German tungsten steel so that durable and sharp. Our knife blade tip is the switchable blade, its easy to remove and replace. ●The steep and sharp knife blade is made for cuts with moderate detail, allowing you to precisely cut images or details larger than 0.75", for best results, interior cuts should be no smaller than 3/4" and width of cuts should not be smaller than the diameter of a pencil. Make sure all cuts are at least 0.25" away from the edge of the wood (the blade will probably be damaged if it crosses the edge of the wood).
Description
Amazing Creative Projects!
FAHUNG Replacement Knife Blade Tip
FAHUNG replacement knife blade tip is a deep cutting blade tip that is made for use specifically with the Maker 3/Maker cutting machine.
How to Change a Knife Blade?
Step 1
Grab the white cap and slide it over the top of the blade and the housing sleeve. It will completely cover the blade and the sleeve.
Step 2
Using the ridges on the changing cap to help your grip, firmly squeeze the cap and turn it to the left, loosening the sleeve until it comes off. The sleeve will be inside the changing cap. Leave it in there and set aside.
Step 3
Tilt your housing down and the blade will fall out. or pull the old blade out. Set the blade aside.
Step 4
Remove the new blade from the packing tube.
Step 5
Remove the white safety tip to expose the knife blade tip.
Step 6
Hold the blade by the base, line up with the slot on the housing, and slide blade in to place.
Note that the blade will only line up with one slot on the housing. It will not slide in to place unless it is lined up with the correct slot.
Step 7
Grab the changing cap (with the sleeve still in it), put back on the housing and twist to the right until sleeve is firmly back in place. Be sure it is on tight!
Step 8
Remove the changing cap and set aside. Do not throw away! Cover the safety cap.
What materials can I use with the knife blade?
Our knife blade replacement tip is customized specifically for thicker materials like: