Feature

●A LITTLE DIFFICULT TO USE, SKILLS ARE NEEDED for using this cutter, several times practice are strongly suggested for the user, ESPECIALLY FOR A FIRST-TIME USER, you may need more practices to use this product.
●Unique V type blade, cutting thickness up to 8 mm (90° Mode) or 5 mm (45° Mode), 3+1 double-end blade comes with cutter;
●Can be used for cutting corrugated cardboard, KT board, chevron board,leather, kraft paper and vinyl...etc
●Good To make decorative frames for pictures/photos, make architectural models, or frame artwork, etc.
●Carefully score the mat/board (drawing lines with pencil), and cut over it a few times until it cuts through totally. Do not force yourself to finish the cutting with one stroke.
●Slightly cutting the corners of the mat/board for a nice sharp cutout for several times.
●Do not push the blade out too much. Position the blade point not more than 0.3mm out of the mat board.


Description

45 Degree Cutter45 Degree Cutter

  • TAIYUYUE professional mat cutter is designed for cutting 45/90 degrees angle for mat boards cutting. Perfect for customizing your mat board and making decorative frames. To make architectural models, use this 45/90-degree cutter to cut mat boards into 45-degree bevel or straight edges and join the edges together for a neat corner.
  • Our cutter comes with 1 high-quality stainless-steel blade, and we offer buyer 3 free spare blades for buyer. The double ended blade is convenient and cost saving, and there is four cutting edges, so when its time to change your blade, simply turn the blade to an unused side. Blade depth can be adjusted depending on the thickness of the material to be cut.
  • Non-slip panel and base are helpful when cutting. The cutter fit hand very well and easy to contol after practice. Safe Blade latch design make the cutter more safe when not in use.
  • Good to make decorative frames for pictures and photos, to make architectural models, and to frame artwork, etc.

TAIYUYUE CUTTER A1TAIYUYUE CUTTER A1

TAIYUYUE Cutter 45/90° Bevel Mat Board Cutter

Size （approx） L x W x H: 101 x 66 x 60 mm / 4 x 2.6 x 2.4“
Material Plastic
Blade Stainless steel
Color Blue
Weight 4.3 ounces
Spare Blade 3
Cut Depth （ 90° Mode） ≤8mm
Cut Depth （ 45° Mode） ≤5mm
TAIYUYUE CUTTERTAIYUYUE CUTTER

How to cut the 45° ?

TAIYUYUE CUTTER FTAIYUYUE CUTTER F

TAIYUYUE CUTTER CTAIYUYUE CUTTER C

TAIYUYUE CUTTER HTAIYUYUE CUTTER H

TAIYUYUE CUTTER GTAIYUYUE CUTTER G

45° | Step 1

  • Push the panel to 45 degrees (you can hear a slight clicking sound when it is in place), then pull out the blade safety latch.

45° | Step 2

  • Draw cutting lines on the board back, and align the RULER with the line drew to position. Keep the ruler as freezed as possible, do not move.

45° | Step 3

  • Make sure the cutter is close to the ruler enough, then adjust the blade depth accordingly, and cut along the ruler slowly and carefully, and cut over it a few times until it cuts through. Do not force yourself to finish the cutting with one stroke.

45° | Step 4

  • Repeat previous steps to finish the cutting.

How to cut 90° ?

TAIYUYUE CUTTER BTAIYUYUE CUTTER B

TAIYUYUE CUTTER CTAIYUYUE CUTTER C

TAIYUYUE CUTTERTAIYUYUE CUTTER

TAIYUYUE CUTTER ETAIYUYUE CUTTER E

90° | Step 1

  • Only when the blade is fully retracted, the panel can be pushed to 90°, otherwise, it may cause the blade to break. Push the panel to 90°, then push the bottons on the both sides to lock it.

90° | Step 2

  • Draw cutting lines on the board back, and the CUTTER MARKS should be put on the line. Keep the cutter as freezed as possible, do not move.

90° | Step 3

  • Make sure the ruler closes the cutter, and keep the ruler fixed, then adjust the blade depth accordingly, and cut along the ruler slowly and carefully, and cut over it a few times until it cuts through. Do not force yourself to finish the cutting with one stroke.

90° | Step 4

  • Repeat previous steps to finish the cutting.

Tips for cutter using.

TAIYUYUE CUTTERTAIYUYUE CUTTER

TAIYUYUE CUTTER KTAIYUYUE CUTTER K

TAIYUYUE CUTTER MTAIYUYUE CUTTER M

Practice is needed

  • Practice makes perfect.Slowly makes perfect.
  • Especially for a first-time user, practice is strongly suggested.
  • This tools need buyer spend some time to learn how to use
  • Please think twice before order, it may used not as easily as thought

More things need to know

  • Do not push the blade out too much. Position the blade point not more than 0.3mm out of the mat board
  • ·Thick, wide, and non-slip rulers are very helpful tools
  • Cardboard surface, Styrofoam sheet or cutting mats are recommended used as underlay

  • We offer 3 free spare blades
  • Please retrack the blade and push out the blade latch after using