Feature

●This item include: 3pcs 11oz Clamps + 3pcs 12oz Clamps + 3pcs 15oz Clamps.
●Easy to install and replace in seconds. The mug clamp can be re-used.
●Used with 3D sublimation machine to fix the mug and picture together to prevent it from deformation.
●Main Material:Heat-resistant silicon and metal.
●Due to the difference between different monitors, the pictures may not reflect the actual color of the item.


Description

Item include: 000208*3
3 x 11oz Sublimation Silicone Clamps
3 x 12oz Sublimation Silicone Clamps
3 x 15oz Sublimation Silicone Clamps
Operation Steps:
1. Prepare 3D sublimation transfer machine, printer, sublimation ink, sublimation paper, high temperature resistant tape, mugs and silicone clamps;
2. According to the size of the mug, print the required picture on the sublimation paper;
3. Cut the paper, paste it on the outside of the mug, and fix the picture with high temperature tape;
4. Clamp the silicone clamp on the mug, so that the picture and the mug are completely attached and pressed tightly;
5. Put it into the pre-heated 3D transfer machine and finish the production.