[US Plug 110 u2011120V]
Specification:
Item Type: Submersible Pump
Model: EB Y777
Material: ABS
Power: 75W
H Maximum: Approx. 3meter / 9.84ft
Maximum Flow Rate: 3000L/H
Water Depth: Approx. 100cm / 39.37in
packing list:
1 xSubmersible Pump
1 x Adapter
1 x User Manual
Note:
1. Before working, the submersible pump should be connected to and operated within the voltage and frequency range indicated by the submersible pump. Do not use voltages and frequencies other than those specified.
2. Do not use the submersible pump in flammable and corrosive liquids, only in fresh water and seawater.
3. The submersible pump must be safely immersed in water and not exposed to water during operation, otherwise it may cause permanent damage to the submersible pump.
4. It is best not to operate submersible pumps in water above 35℃ or below the freezing point, as this can cause pump damage.
5. If the outlet power supply of the submersible pump is damaged, do not continue to use the pump to ensure safety.
6. When the water pump is used away from the water surface, the joint should be tightly connected and air should be evacuated through water injection.
7. Cut off the power supply when overhauling the submersible pump.
8. Do not allow the submersible pump to idle or work away from the surface for more than 5 minutes.
9. Do not directly pull the power cord to lift the submersible pump, otherwise the power cord may be pulled out.
10. Disconnect the power cord before removing the submersible pump from the water to ensure safety.
11. Submersible pumps with a maximum diving depth of 1 m.
12. If additional sockets are required, use a power cord with a relative voltage and current rating.