Feature(may vary by option.)
●【Split Capacitor Motor with Efficiency】Oil-free PSC motor with thermal overload protection produces 1/3hp output power for higher performance and increased reliability. Pump moves up to 2000 gallons water per hour at zero feet, 22.5 gallons per minute at 10 ft of discharge lift.
●【Last-inch Drain Pump】Unique water sensor switch with non-return valve drains water to the lowest suction level of 1/25inch without back flow. It would stop automatically after running 15sec when theres no water covering on the sensor to remove more remaining wate on flat floor. Designed for completely draining clean or slightly dirty water from flooded house, basement, sumps, window wells, water tanks, pools, cisterns, hot tub spas, and flooding in low lying areas.
●【2 In 1! Automatic&Manual Operation】This utility sump pump can work manually or automactially according to actual needs. With easy insert-in design, you can freely switch the pump to work as manual or automatic.
●【Lightweight, Convenient to Use&Carry】Item weight: 8.8lb. The 25 feet long grounded waterproof cord with portable handle allows convenient installation from farther position, no more trouble for dealing with extension cords!
●【Safety Guarantee and Customer First】Follows UL 778 standard for safety and 100% manufacturer tested. For any question, please dont hesitate to write to us through our storefront and click "ask a question", or support email to us, we will respond within 24 hours.
●【Simple to Install with Hoses】Comes with three plastic adapters: 1”&1-1/2" connect discharge hoses for high capacity pumping; 3/4" GHT&1-1/2" NPT connect threaded hoses for quickly installation. *This item is NOT suitable for expandable garden hoses that would cause poor output flow.
[with Tethered Float Switch]
[with Built-in Float Switch]
[Manual Activation]
[with Water Sensor Switch]
Description
-
Manual activation
Pump removes water down to 0.04 inch of depth with check valve. Just remember to plug off after use.
-
Automatic on off
3 sensor locating holes for 3 different start water level:
- Above 5" on
- Above 3.5" on
- Above 2.5" on
-
Drain more water in Automatic
Put sensor directly on earth for lower water level, pump stops after 15s if no water on sensor.
Lower Water Intake holes Design
The special design that pump bottom with impeller inside is very close to the ground achieves super low water level sucking.
Pump has the ability to remove water down to 0.4" under Automatic mode or 0.04" in depth under Manual mode with ease that can almost remove all flooding water from the floor.
Multipurpose Adapter Kit for Easy Installation
Comes with three plastic adapters that makes hose connection quick and easy:
- A: 1-1/2 inch NPT connects threaded hoses
- B: 1-1/2 inch barbed connects discharge hose; 3/4 inch GHT for quick start with garden hoses
- C: 1 inch &1-1/2 inch barbed connect discharge hoses; 1 inch NPT connects threaded hoses
Reinforced Stanless Steel Base
The integrated stainless steel plate is well mounted to pump base that can protect impeller from sharp debris with durability.
Long Power Cord with Rope
25FT lengthened cord brings more safe and convenient usage that can start pump from farther position, no more trouble for dealing with extension cord!
Steady Motor with Reliability
Advance PSC motor with overheat protection for efficient performance and safty:
- Max Head: 23FT
- 2,000 Gallons per hour at 0
- 1350 Gallons per hour at 10
Check Valve Design
The non-return valve attached can be easily installed on pump outlet to prevent back flow for draining water on flood with no secondary pollution.
A Versatile Sump Pump for Various Water Draining Needs
Ideal for transferring or draining clean or slightly dirty water from any enclosing environment, such as flooded basements, water wells, garages, garden ponds, tankless heaters, hot tubs, pools, flat roofs and the sink of accumulated water, and so on, but not for any corrosive or flammable liquids.