Feature(may vary by option.)

●【4:1 SHRINK RATIO & QUICK SHRINK】Recovers to 1/4 of our industrial & marine heat shrink tubing original diameter, that makes a tighter seal. Eliminates the problem of 3:1 tubing not shrinking tight enough. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds.
●【HEAT SHRINK TUBING WITH ADHESIVE】While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation.
●【DUAL WALL TUBING】Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief.
●【5 SIZES】Heat shrink tubing kit includes 5 most commonly used diameters ranging from 1/4" to 3/4". Heat shrink tube is precut to 1.77".
●【WIDE APPLICATIONS】Our waterproof heat shrink tubing can be used in automotive, marine, industrial, hobby RC, and home electrical wiring projects.Such as :Electrical insulation, Environmental seal to protect from moisture, UV and fuel,Grouping loose wires (usually in wire harnesses),Protecting surfaces against abrasion, peeling, and denting.

[196pcs]





Description

11
11
11

11
Package Contents

  • 60pcs 1.77" lengths φ1/4"
  • 36pcs 1.77" lengths φ5/16"
  • 60pcs 1.77" lengths φ1/2"
  • 30pcs 1.77" lengths φ5/8"
  • 10pcs 1.77" lengths φ3/4"
  • 1x Plastic Box

  • High Quality
  • Waterproof
  • Long service life
  • High Strength Toughness
  • Corrosion resistance
  • Good electrical insulation
  • High temperature resistance

Eventronic 196PCS 4:1 Dual Wall Adhesive lined Heat Shrink Tubing Kit

Specification

  • Color: Black
  • Material: Polyolefin
  • Heat shrink ratio: 4:1
  • Operating Temperature:-67°F to + 257℉
  • Shrinkage Temp: 183℉-248℉(Fahrenheit)
  • Full Shrinkage Temp: 248℉maximum
  • Tensile strength: 10.4Mpa
  • Dielectric strength: 15 kV / mm
  • Flammability: Flame Retardant

  • How to use it?
  • 1. Choose right size heat shrink tubing, whose diameter is no more than 4 times the size of wires. as it is a 4:1 heat shrink ratio.
  • 2. Cut the heat shrink tube to the length you need.
  • 3. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hairdryer, heat guns heating for large one until the wire was wrapped tightly.
  • 4. Dont touch the tube until it becomes cool.

11

22

11

HEAT ACTIVATED ADHESIVE

  • Wire heat shrink tubing has an internal adhesive layer.
  • When heated,Creates a waterproof seal
  • Greater tensile strength
  • Resistant to stretch and vibration

PROFESSIONAL GRADE

  • CE CERTIFICATION
  • UKCA CERTIFICATION
  • SGS CERTIFICATION
  • UL Listed

WATERPROOF HEAT SHRINK TUBING

  • Connection is sealed from the elements
  • Protection against wire corrosion
  • Can be submerged under water

More Versatile Heat Shrink Tubing

Are you looking for how to repair a damaged wire to make it waterproof while maintaining a strong connection? Eventronic waterproof heat shrink tubing is an easy to use solution that can be used in automotive, marine, industrial, hobby RC, and home electrical wiring projects. It can be used in a variety of applications such as:

Electrical insulation (wire repairs, insulating electrical terminals wires, protecting charging cables, insulating solder joints)

Environmental seal to protect from moisture, UV and fuel

Strain relief for electrical terminals

Grouping loose wires (usually in wire harnesses)

Creating thermal insulation for heat sensitive components

Protecting surfaces against abrasion, peeling, and denting

4:1 Shrink Ratio Shrink Tube

When heat is applied, this wire shrink wrap tubing will recover to a 1/4 of its original diameter. Its high recovery ratio makes it possible to repair most damaged cable jackets without removing connectors. Therefore, 4:1 shrink ratio tubing can be used in significantly more applications compared to 3:1 shrink ratio tubing. Additionally, 4:1 marine heat-shrink tubing shrinks around wires and terminals more tightly, eliminating any air gaps.

Heat Activated Adhesive Lining

This is a waterproof shrink tubing with the internal adhesive layer. When heat is applied, shrink tubing recovers and the internal adhesive layer melts. A small fillet of clear adhesive (about 1 mm wide) becomes visible at the end of the heated tubing. When cooled down, it forms a rigid seal. Heat activated glue strongly adheres to wires, terminals or any other surfaces. When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection waterproof. For best results we recommend using a heat gun.

Dual Wall Shrink Tubing

Dual wall marine grade heat shrink tubing provides better rigidity and abrasion resistance. Dual wall tubing design has the increased ability to stand up to wear and tear. This wire heat shrink tubing is flame retardant.

Whats in the box

  • Heat Shrink Tubing Kit