[Large]

The STAS dibond hanger is a self-adhesive aluminum plate with a hook that can be attached to the back of flat panels. With the STAS dibond hanger we supply a special cleaning tissue that should be used to make the surface free of grease and dust. The STAS dibond hanger is suitable for sticking on the back of flat panels such as mirrors and art/photos on acrylic, glass, dibond, plexiglass or aluminium*. *Rough, porous or fibrous surfaces (wood/MDF/gypsum board/gypsum blocks) and PP/PE plastics are not suitable for sticking on the STAS dibond hanger. NB! It is very important that you make the back of the object you want to hang grease and dust free with the supplied cleaning tissue. Let the cleaner dry thoroughly. Then apply the foam tapes in the corners, press the STAS dibond hanger firmly for 10 seconds and let it dry for 24 hours before use. Disclaimer STAS dibond hanger It is the users responsibility to carry out the mounting of the STAS dibond hanger in strict accordance with the supplied mounting instructions. All technical information and data are provided on the basis of quality tests and our many years of practical experience. These are considered an average value and are not suitable for specification. For this reason, STAS picture hanging systems cannot provide any guarantee, express or implicit, with regard to the suitability of the STAS dibond hanger for what the user wants to hang. The user is therefore responsible for determining whether the STAS dibond pendant is suitable for the situation in question. In case of doubt, our staff will be happy to advise you.