Feature(may vary by option.)

●Contacts:Normally Open (NO)/ Flat Base Metal Case / 10-32 Terminal
●3 Pole Battery Isolation Solenoid, 12VDC With 2 Copper Point,Housing plated Steel Case / 180Flat mounting bracket./ Mounting holes: 5/16 x 19/32, 2-13/64 on centers.
●Our Coil Roll is using 180℃ Copper. Max Current Above 200amp/ Rate Current: 100A / Our Cover is Environmental Plating,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion
●if be Continuous Duty,can work 5 minutes under 150Amp, but NEED BREAK otherwise will be too hot to burned or fired
●Note:If it is the energizing circuit which is typically 16/18 Awg , suggest a 5amp fuse;If 10 Awg wire suggest 30 amp auto cicuit breaker; If high output alternator, suggest an 8 Awg wire with a 50 Amp auto circuit breaker

[4-Terminal]




[4-Terminals  & resistors and diodes]




[3-Terminal]





Description

ezgo solenoid relayezgo solenoid relay

Specifications

Voltage 12VDC
Resistance 14Ω
Capacity 10.2W
Max Transient Flash Current 200Amp
Continuous Working Current Under 80Amp
Contact Studs 5/16 -24 Studs Standard & Long
Bracket mounting Holes 5/16 x 19/32 2-13/64 on Center

How to Install The solenoid Relay

continuous duty solenoid relaycontinuous duty solenoid relay

Continous Duty SolenoidContinous Duty Solenoid

Heavy Duty SolenoidHeavy Duty Solenoid

12v solenoid relay12v solenoid relay

waterproof solenoid relaywaterproof solenoid relay

Heavy Duty

  • 180℃ copper coil wire rolls upgrade the conductivity of the product
  • Max Transient Current can reach 200Amp

Water-Resistant

Zinc-Plating Outer and Potted Coil Interiors protect YOUR solenoid against any harsh environment

Dustproof

Firmly Enclosed for overall protection from dust, dirt, sand and any other substance that could cause damage to YOUR Solenoid.

Replacement

  • 100% OEM Match and Replacement
300A solenoid relay 24V solenoid relay 36V solenoid relay 3 terminal relay
300A Continuous Duty Solenoid Relay 36V Ezgo Solenoid Continuous Duty Solenoid Relay 24V ontinuous Duty Solenoid Relay 3 Terminal Continuous Duty Solenoid Relay
Voltage 12 Volt 36 Volt 24 Volt 12 Volt
Max Intermittent Current 300 Amp 150 Amp 150 Amp 150 Amp
Material Nickel Plating Zinc Plating Zinc Plating Zinc Plating

Product information