Feature(may vary by option.)

●▲【RJ45 RJ11 Cable Tracking】 : RJ11 and RJ45 cables can be found through transmitter. It is simple and fast to find the line without stripping the outer skin of the cable
●▲【Cable Sequence Calibration】 : It can detect the cable sequence, open circuit, short circuit, wrong pair and reverse connection of the network cable
●▲【Detect Cable Level and Positive and Negative Polarity】 : Use the transmitter to detect the DC level or positive and negative polarity of the line.
●▲【Telephone Line Status Detection】 : It can detect the status of the working telephone line (idle, ringing, off-hook) and discriminate TIP or RING line
●▲【Cable Connectivity Detection】 : Only transmitter can be used to detect the connection status of the cable
●▲【Transmitter Undervoltage Indication】 : Rotate the function knob of the transmitter to the “SCAN” position. When the transmitters battery is lower than the working voltage, the cable finding function indicator “SCAN” on the transmitter will flash. When the indicator is flashing, please Replace the battery in time
●▲【Receiver Undervoltage Indication】 : Turn on the power of the transmitter, press and hold the receiver “SCAN” button to bring the probe to the RJ45 connector of the transmitter, and adjust the volume adjustment knob of the receiver to the maximum volume position. If no sound is heard from the receiver or When you have a small sound, please replace the battery in time

[Analogue Signal - FY869]

[Digital Signal - FY869B]

Description

Network & Cable Testers

Notes: Please note that the wire must be in a power-off state, otherwise the equipment will be damaged.
The Network & Cable Testers is a hand-held cable testing tool, which can be used for line hunting of telephone lines and network lines.
It can withstand 48V. It can be used to directly route the 48V switch, determine the line position and breakpoint, detect the line sequence of the network cable, the positive and negative polarity of the line, the state of the telephone line, the line on and off detection.
There is no need to manually switch between digital and analog signals. The device will automatically switch to the corresponding detection mode.

Specifications

Operating temperature: 32 ~ 104 ℉ maximum 80% relative humidity (non condensing)
Storage temperature: 14 ~ 122 ℉, maximum 80% relative humidity (non condensing, remove battery)
Altitude: <6561.68 ft
Explosion proof type: IP 40
Transmitting signal distance: > 984.25 ft
Battery: 9V x 2
Transmitter size: 5.12x2.56x2.36 in
Receiver size: 7.87x0.79x1.5 in


Wide Measurement Range The maximum transmission signal distance of the network tracker is greater than 984.25 feet.	Headphones and Adjustable Volume The network finder has a 0.14" headphone jack, and the volume can be adjusted freely.	LED Light There is an LED light on the transmitter, which can also be used in the dark environment.


Line Test Function The Line Test Function is on the line of the open, shorted, wrong, reverse the physical connection detection.	Line Tracing Function This instrument is suitable for RJ11, RJ45, other metal wires can be found through the transmitter.	Line Pairing Function The instrument has the function of detecting various states of the telephone line, which can only be detected by the transmitter, such as judging the TIP or PING line, and judging the idle, ringing and off-hook status of the telephone line.