Feature

●Ergonomic pistol grip handle.
●Special tools for polishing and modifying sheet metal surfaces
●The adjustable air intake in the rear section, easy to control
●hook and loop disk attachment.


Description

3-inches mini air-polishing kit feature:

  • 3-Inch mini air polisher kit provides maximum comfort in a small, lightweight package.
  • Ideal for buffing and polishing paint, metal, iron, wood, plastic, metal, rubber, stone, marble grinding and plastic surfaces to the high-gloss finish. pneumatic polishing tool.
  • Air input adjust, adjustable speed regulator allows one-hand operation, easy control.
  • Particularly suitable for small areas and fine polishing, Widely used in the furniture industry, mold industry, product parts, and other smooth surface finish grinding.
  • Mini air polisher, direct-drive 2,000rpm. ergonomic pistol grip handle, Rear exhaust, hook and loop disk attachment.

3-inches mini air-polishing kit technical specifications:

  • 3" polisher kit.
  • Ergonomic pistol grip handle.
  • Rear exhaust.
  • Hook and loop pad attachment.
  • Pad size: 3" (75mm)
  • Speed: 2000 RPM.
  • Air consumption: 3.1 cfm, 88 L/min.
  • Spindle thread: M6*1 inch.
  • Weight: 1.63lbs.(0.74kg)
  • Pressure: 90psi.
  • Air Inlet: 1/4".

Whats in the Box:

  • PROSHI 3-inches mini air polisher 1 pcs.
  • 3-inches (75mm) hook and loop pad 1 pcs.
  • Yellow 3-inches polishing foam pad 1 pcs.
  • White 3-inches polishing foam pad 1 pcs.
  • Wool buffing pad 1 pcs.
  • Wrench 1 pcs.
  • Instruction Manual 1 pcs.
  • American standard 1/4 NPT quick connector 1 pcs.

3-inches mini air-polishing kit detailed

Mini Air Polishing machineMini Air Polishing machine

Different angle views for 3-inches mini air-polishing kit

air polishing kitair polishing kit

mini air sander kitmini air sander kit

3-Inches Mini Air Polishing Kit3-Inches Mini Air Polishing Kit

3" Mini Air Polishing Kit3" Mini Air Polishing Kit

More views for 3-inches mini air-polishing kit

small air sander kitsmall air sander kit

small polishersmall polisher

mini air polisher kitmini air polisher kit

Start switch for air polisher view

Start switch, high-quality engineering materials, higher strength, lighter control opening and stopping

Air volume speed switch for air polisher

Air volume speed switch, adjust inlet air, easy to control from Low to High.

3-inches mini air polisher pad replace

Use a wrench to insert the gap between the pad and the polisher, find the wrench and rotate the disc to remove and replace the disc.

mini air polisher kitmini air polisher kit

Instruction manual for 3-inches mini air polishing kit

  • Please check off all tightening parts of the tools to be in good condition before operation.
  • Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
  • Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
  • Release the air supply when replacing the backing pad.
  • Wear protection glasses, eye protector, dust mask and gloves at operation.
  • Have a short break in every 30minutes to avoid any possible injury due to tiredness.
  • Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
  • Do not touch the rotating part of the tool with your hand or your body at operation.

3-INCHES MINI AIR POLISHING KIT3-INCHES MINI AIR POLISHING KIT

Routine maintenance for 3-inches mini air polishing kit

  • Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool.
  • Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
  • Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
  • Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
  • Do release the water out of the air compressor and air hose after an operation.
  • Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.