Feature

●YHTAUTO Affordable and Prime Blower Motor Resistor, Directly Fit
●Fits Dodge Nitro 2007-2009 Without Automatic Temperature Control
●Fits Jeep Liberty 2008-2009 Without Automatic Temperature Control
●Reference Number: 68003998AA,RU-644
●1 year unlimited-mileage quality guarantee

Description

As part of your vehicles heating and cooling system, the blower motor resistor allows the heater or A/C to change the speed of the fan, which is actually controlled by reducing the amount of current flowing to the blower motor. It can be used to set the speed of the blower motor from low to high according to your preferences. YHTAUTO blower motor resistors are specifically designed to achieve the performance and function of OEM components.

Item Specification

Item Type: HVAC Blower Motor Resistor

Terminal Type: Blade

Connector: 4 Pins

Bolt Hole Quantity: 2

Wiring Harness Included: No

Reference Number: 68003998AA, RU-644

Vehicle Information

Dodge Nitro 2007-2009 Sport Utility
Jeep Liberty 2008-2009 Sport Utility

Note: It will only fit manual temperature control, not fits automatic climate control

Please confirm the vehicles model, year as well as the install location when you purchase!

Blower Motor Resistor Failure Symptoms


No Air Blowing Through Vehicles Vents The blower resistor is responsible for transferring power from the battery to the blower itself, so one of the symptom of the resistance failure is that no air flows out of the car exhaust.	Blower Motor Only Working on High Speed This occurs due to the failed blower motor resistor not being able to control the flow of electric current.	Blower Motor Does Not Work on Certain Settings Another symptom of the blower motor resistor failure is that it fails or does not work at all in one or more settings.

How to Test the Blower Motor Resistor?

Step1: Locate the Blower Motor Resistor

The resistor is usually located near the blower motor under the dashboard. It is most likely fixed in place by a plate with two or four screws. It is best to consult your vehicle manual, because the exact location of the resistor depends on the type of car you are using.

Step 2: Test the Fuse

First use a 12-volt test light to test the fuse when the engine is started. To do this, simply connect the wire leads of the test lamp to the bolts or any good ground. Then connect the probe of the tester to the fuse terminal. If both terminals are energized, the fuse is good. If not, the fuse must be replaced.

Step3: Test the Blower Motor

To test the power supply of the blower motor, unplug the power supply and repeat the previous step. Only this time, connect the test probe to the terminal of the motor. Repeat this process at all different motor speeds. If all terminals are energized, the motor is still in good condition. If not, it needs to be replaced.

Step4: Check the Voltage At the Relay and Electrical Connector

When testing relays and electrical connectors, current should flow into both terminals of the resistor. If one terminal is not energized, the resistance will wear out.

Item Specification

Vehicle Information

Blower Motor Resistor Failure Symptoms

No Air Blowing Through Vehicles Vents

Blower Motor Only Working on High Speed

Blower Motor Does Not Work on Certain Settings

How to Test the Blower Motor Resistor?

Step1: Locate the Blower Motor Resistor

Step 2: Test the Fuse

Step3: Test the Blower Motor

Step4: Check the Voltage At the Relay and Electrical Connector

Product information