Feature

●★【FITMENT】: 2007-2012 Acura MDX/RDX /2009-2014 Acura TL/TSX /2007-2014 Toyota FJ Cruiser /2011-2013 Ram 1500, 2011-2017 Ram 2500, 3500
●★【FITMENT】: 2007-2011 Honda CR-V /2011-2016 Honda Odyssey Mini Passenger Van/ 2009-2015 Honda Pilot / 2008-2012 Honda Accord
●★【Replace Part Number】: 25770668, 700203, 615-00129, 15-80644, 5191345AA, 68048903AA, 700203, 72223XA00A, 75817, 79310STKA41, 79310STXA01, 79310TA0A01, 79310TK4A41, 7L4Z19805A, 7T4Z19805A, 8710335100
●★【Advantage Of The Motor】: Quieter, more energy-efficient, more durable, Wind power strong and No noise. Permanently lubricated self-aligning bearings with long design life and reliable performance.
●★【1 Year Warranty】: Every Blower Motor Resistor must take inspected and tested multiple times before the shipment, if you get any problems with our this Blower Motor Resistor, please contact us in the first time, we will response it as soon as possible.


Description

When you turn up the AC/heat in your truck and see no change in the amount of air coming from the vents you likely need to replace your blower motor.

Once you have changed the factory blower motor that has failed on your truck you ;ll be able to control your AC/heat again.


OE Part Number :

25770668
615-00129
15-80644
5191345AA
68048903AA
700203
72223XA00A
75817
79310STKA41
79310STXA01
79310TA0A01
79310TK4A41
7L4Z19805A
7T4Z19805A
8710335100
TD1161B10

Fitment Of The Heater Blower Motor :

2007-2012 Acura MDX/RDX
2008-2012 Honda Accord
2009-2014 Acura TL/TSX
2007-2011 Honda CR-V
2011-2016 Honda Odyssey Mini Passenger Van
2009-2015 Honda Pilot
2007-2014 Toyota FJ Cruiser
2011-2013 Ram 1500
2011-2017 Ram 2500 / 3500 Truck without Dual Zone Temperature Control Heater Blower Motor with Fan Cage

How to replace?

1) Locate the blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. And disconnect the blower motor electrical connector

(Note: On older vehicles, the blower motor may be located in the engine compartment on the passenger side firewall).

2) Remove the retaining screws to the blower motor assembly.

3) Remove the blower motor retaining screws. Remove the motor from the box.

4) Compare the new blower motor to the old one to verify that you have the correct part. Install the new motor into the box and tighten the retaining screws. Re-install the blower motor assembly.

5) Connect the blower motor electrical connector.

6) Operate the heating and A/C system. Verify that the blower motor operates at all speeds and that the system produces hot and cold air.

7) Searching related installation video on the internet will be also recommended.