Feature(may vary by option.)

●YHTAUTO ABS Sensor Meets OEM Specifications, Direct Replacement to Original Parts
●Fits Toyota RAV4 (Only for 4WD Model) 2006-2012
●Placement on Vehicle: Rear Right, Passenger Side
●Reference Number: 89545-42040, ALS1251, 5S11395, SU12848
●ADVISE: Please Ensure That Your Vehicle Fits Our Compatibility Chart Before Purchasing. Do Not Hesitate to Contact Us if You Have Any Doubts or Queries.

[Rear Driver & Passenger]




[Rear Driver]




[Rear Passenger]





Description

11

The vehicles anti-lock braking system (ABS) is a safety device that prevents skidding. It does this by releasing the brakes to keep your wheels from locking up. It can also increase braking pressure on a wheel that is spinning much faster than the others. All of this happens very quickly-applying and releasing pressure as much as 15 times per second. The result is greatly improved vehicle control, especially on smooth roads. In order to do this, the ABS relies on the speed sensors on each wheel. This component, also known as an ABS sensor, is attached to the hub of a drive tire and is responsible for monitoring multiple vehicle functions such as traction control, anti-lock braking systems, and the vehicle’s speed.

11

Item Specification

  • Item Type: ABS Wheel Speed Sensor
  • Connector: 2 Pins
  • Location: Rear Right, Passenger Side
  • Reference Number: 89545-42040, ALS1251, 5S11395, SU12848

Vehicle Information

Replacement for Toyota:

  • RAV4 2006-2012

Note: It will fit 4WD models only

11

How to Clean the ABS Wheel Sensor on Your Car

11

11

11

  • Begin by loosening the wheel lugs on the front wheel or wheels (depending on where your sensors are).
  • Next, jack the front of the car up and rest it securely on your jack stands. Remove the wheel lugs and take the front wheel or wheels off.
  • Turn the steering wheel opposite the side youre working on. For example, if youre working on the passenger side, turn the wheel all the way toward the drivers side. This will give you easier access to the ABS parts.

  • Locate the ABS wheel sensor. Remove the bolts that attach it to the rest of the suspension.
  • Follow the line and wiring harness to see if there are more bolts. Remember not to force it or pull too hard.
  • Different vehicles are set up differently, but the idea is the same in most cases. If youve removed all of the bolts and other attachment components, you should be able to pull the sensor away with no effort at all.

  • With the sensor free, take your rag or brush and wipe the sensor until its clean.
  • Prefer not to use any chemicals on the sensor to avoid potential problems. However, if the sensor is really grungy, use a mild soapy solution and rinse well.
  • To finish the job, reinstall the sensor in exactly the same manner as you removed it. Dont be discouraged if your ABS light doesnt turn off right away. It may take up to a few days for the system to reanalyze itself and reset fully.

The above steps are only for reference, if you do not know how to operate, please consult a professional mechanic.

Product information