Feature

●Model: RC040708 (I.D. (Fw)= 1/4inch, O.D. (D)= 7/16inch, Width (C)= 1/2inch)
●ST14 steel drawn cup, GCr15 needle rollers one way clutch
●Good heat tolerance, high load carrying capacity and stiffness
●Low cross section, enable downsizing and suit for use in restricted mounting spaces
●Pre-Lubricated. Good running properties


Description

Specification:
Model: RC040708
Drawn Cup Material: ST14 Steel
Needle Roller Material: Chromium Steel (GCr15)
Bore Diameter (Fw): 6.35mm / 1/4"
Outside Diameter (D): 11.112mm / 7/16"
Width: 12.7mm / 1/2"
Torque: 1.9N*m
Number of Pack: 1 Pcs

Description:
-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
-NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.