Installation Tips:
1.Please Make Sure You Take The Proper Measurements Before Purchasing.
2.Make Sure You Get 5-7 Turns Before Tightening.
3.Suggested To Be Torqued Down By Hand At 95 FT LBS.
4.The Back Of The Adapter Must Sit Flush On The Hub.
Safety guidelines(Minimum number of turns Repalcement for wheel bolts nuts)
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
1 2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length