Feature(may vary by option.)
●GCSOAR factory supply Real 20Amp PWM Solar charge Controller , 12V/24V auto work solar panel regulator ,Max solar panel input 300W charge for 12V battery or 600W charge for 24V battery; with dual USB ports, USB Output 5V/2A max ; Lower Heating value, mulit self-protection functions
●Lower Heating value, mulit self-protection functions ,Settable operating modes of loads, fully 3-stage PWM charge management.
●The solar regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically;
●Mutiple Electric Protection: short-circuit protection,open-circuit protection,reverse protection,over-load protection, more safty for using,Easy to install and operate: Solar controller can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial ,motor homes, boat etc.
●Welcome to test our controllers compare with others version , we are confident to meet your needs . If you have problem about our controllers , please contact with our serives team in Chicago Illinois to exchange new controller , we will supply quality guarantee and best sevices for our clients .
[10amp (12v & 24v)]
Description
?GCSOAR Factory directly supply real high quality rated current 20A PWM solarc charge controller ,more stable working technique and lower heating .(Our 20Amps PWM solar charge controller could compare with others 30Amps controller , lower heating and real protection functions.Welcome for comparison testing) Our team in Chicago Illinois supply technical support and solar system design free for you . Suitable for home solar system ,farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar system.
Specification:
* Charge Current: 20A
*Batt voltage: DC 12V/24V Auto
* USB Output: 5V/2A Max
* Working Temperature: -35°C to +60°C
*Self consume:<10mA
*Size:133x70x35mm
*Over discharge Protection: 10.7V/21.4V
*Charge recover voltage: 12.6V/25.2V
*Overcharge Floating charge: 13.7V/27.4V
*Over discharge Protection: 10.7V/21.4V
*Equalization: B01: sealed 14.4V / B02: Gel 14.2V / B03: flood 14.6V
Easy to operate and installation :
Installation STEPS：Connect system in the order of 1.Battery > 2. Load > 3.PV Array in accordance with Figure, and disconnect the system in the reverse order 3. 2 .1.
Note:
<1>Please keep it in cool and well ventilated place to maintain good heat dissipation.
<2>the regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
<3>Make sure your battery has enough voltage for the controller to recognize battery voltage before first installation.
<4>The working temperature of this controller is -35°C to 60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.
Package:
1X PWM Solar Charge Contorller 20A
1X Manual (English)