Feature

●Connect Accumulator Tank to outlet side of water pump for best results
●Accumulator tanks hold a reservoir of air and water down stream from the pump
●Longer pump life, lower battery drain,reducing noise and providing a more consistent water supply.
●Internal rubber membrane eliminates maintenance and simply fitted to new or existing systems
●Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery


Description

★Parameter

Inlet/Outlet Dia:1/2" MNPT

Volume:0.75 Liter(25 FL OZ)

Water psi:Max 125 PSI (8.6 BAR)

Pre-charge pressure:10 PSI(0.87 BAR)

Air Fill Vale:standard automotive style tire valve

Applications:Boat,Marine, RV,Caravan,ect

★Please Note

1.Relieve air psi prior to disassembly

2.Do not use to pump flammable fluids,gasoline,kerosene fuel oil

3.Do not use pump in a explosive environment or use where flammable vapors are present

4.Petrol or fluids with flash point below 37°C(98°F), explosion or death may occur.

5.The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set accumulator tank to ~3 PSI below your water pumps cut-in pressure and make sure it is connected to the outlet of the pump

6.Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.