Feature(may vary by option.)
●EPDM FOAM RUBBER SEAL: Trim-Lok D-Shaped Rubber Seal drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements.
●MANY APPLICATIONS: Durable Trim-Lok Foam Seals can be used for marine, automobile, and home cases ? providing hatch, window, and door seals for cars, trucks, RVs, trailers, boats, and more!
●WEATHER-RESIST: These rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set. General temperature rating of -20°F to +158°F. It is a reliable weatherstrip seal for many applications.
●EASY INSTALLATION: Adhesive-backed D-shaped seals made with two options: BT (3M) tape is a high-strength automotive-grade tape, while HT tape is a general-purpose pressure sensitive tape. Both offer quick, easy, and efficient installation.
●DIMENSIONS: This weather-stripping adhesive rubber seal measures .36” in height, .625” in width, and is 25’ in length. It is also available in a variety of edge thicknesses and can be cut to fit your specific application.
[D Shape with 3M Bonded Tape System 100 Feet .215 inch height .375 inch width]
[D Shape with High Tack Adhesive Tape 100 Feet .562 inch height .75 inch width]
[D Shape (thick wall) with High Tack Adhesive Tape 100 Feet .437 inch height .375 inch width]
[D Shape with High Tack Adhesive Tape 200 Feet .76 inch height .825 inch width]
[D Shape with High Tack Adhesive Tape 25 Feet .215 inch height .375 inch width]
[D Shape with 3M Bonded Tape System 25 Feet .50 inch height .50 inch width]
[D Shape (thick wall) with 3M Bonded Tape System 500 Feet .50 inch height .50 inch width]
[D Shape with High Tack Adhesive Tape 100 Feet .53 inch height .75 inch width]
[D Shape with High Tack Adhesive Tape 25 Feet .50 inch height .50 inch width]
[D Shape with High Tack Adhesive Tape 25 Feet .75 inch height .75 inch width]
[D Shape with 3M Bonded Tape System 125 feet 1.00 inch height 1.00 inch width]
[D Shape with 3M Bonded Tape System 500 Feet .375 inch height .75 inch width]
[D Shape with 3M Bonded Tape System 100 Feet .562 inch height .75 inch width]
[D Shape with 3M Bonded Tape System 500 Feet .36 inch height .625 inch width]
[D Shape with 3M Bonded Tape System 100 Feet .53 inch height .75 inch width]
[D Shape with High Tack Adhesive Tape 25 Feet .375 inch height .75 inch width]
[D Shape (thick wall) with High Tack Adhesive Tape 100 Feet .50 inch height .50 inch width]
[D Shape with 3M Bonded Tape System 25 Feet .75 inch height .75 inch width]
[D Shape (thick wall) with High Tack Adhesive Tape 25 Feet 1.00 inch height 1.00 inch width]
[D Shape with High Tack Adhesive Tape 100 Feet .312 inch height .468 inch width]
[D Shape with 3M Bonded Tape System 25 Feet .312 inch height .468 inch width]
Description
Trim-Lok Rubber Seals create an easy-to-close seal against dust, noise, and vibration. It is a durable option that works in a wide variety of applications including for marine, automobile, and home cases. It is foam weather stripping that provides a reliable seal for RV slide outs, garage doors, boat hatches, car doors, and more. These rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperatures, and compression set. It has a general temperature rating of -20°F to +158°F so you can confidently install where needed. It is a reliable weatherstrip seal for many applications. This foam seal comes in an assortment of sizes and models that can be cut to your desired length, so you are sure to find the perfect solution for every application. The Trim-Lok adhesive-backed D-shaped seals are easy to install with two adhesive options: BT tape or HT tape. BT tape is an acrylic automotive grade tape that creates a moisture barrier and airtight seal between rubber and substrate. HT tape has low initial tack for easy repositioning during installation and needs at least 72 hours of cure time before it comes to full bond strength. HT tape is an acrylic-based adhesive used to hold the rubber seal in place during installation; it may be used in some light duty dynamic applications against a variety of substrates. Prior to install, ensure bonding surface is properly cleaned with a 50/50 mix of denatured alcohol and water solution. Trim-Lok seals are designed to work best with a 25-40% compression of bulb’s original height, with 25% being ideal. Compressing seal more than this will negatively impact lifespan/serviceability. Trim-Lok has been a family run business for over 50 years. Made in the USA, we believe that craftsmanship is never something that requires compromise. Our extensive line of edge trim, trim-seal, locking gaskets, foam hand grips & more provide you with solutions for a variety of marine, automobile, RV and home applications.