Feature(may vary by option.)

●693ZZ (I.D.=3mm, O.D.=8mm, Thickness=4mm)
●693-2Z bearings are Shielded on BOTH SIDES to keep lubricant in
●Made from Carbon Steel, durability and resistance to under heavy loads
●ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
●Static load rating of 144 newtons and dynamic load rating of 474 newtons

[6mmx13mmx5mm]

[12mmx24mmx6mm]

[8mmx28mmx9mm]

[9mmx26mmx8mm]

[9mmx17mmx5mm]

[6mmx15mmx5mm]

[8mmx19mmx6mm]

[25mmx42mmx9mm]

[4mmx11mmx4mm]

[4mmx9mmx4mm]

[8mmx16mmx5mm]

[20mmx37mmx9mm]

[3mmx8mmx4mm]

[5mmx14mmx5mm]

[17mmx30mmx7mm]

[7mmx14mmx5mm]

[15mmx28mmx7mm]

[5mmx19mmx6mm]

[6mmx22mmx7mm]

[3mmx7mmx3mm]

[9mmx20mmx6mm]

Description

NOTE：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: 693ZZ

Seal Type: Double Shielded

Inner Race/Outer Race Material: Carbon Steel

Cage Material: Stamping Steel

Inner Diameter (d): 3mm

Outer Diameter (D): 8mm

Thickness (B): 4mm

Dynamic Load Rating (Cr): 474N

Static Load Rating (Cor): 144N

Accuracy Class: P0 (ABEC-1)

Noise Level: Z2

Number of Pack: 5 Pcs