Feature(may vary by option.)

●Size: 608ZZ (Inner Dia.=8mm, Outer Dia.=22mm, Thickness=7mm)
●Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
●Made from High Carbon Steel, durability and resistance to under heavy loads
●ABEC Tolerance 1 (P0) for most general use
●Same As 608ZZ / 608-2Z / 80018. Pre-Lubricated, Easy to maintain

[8mmx22mmx7mm]

[4mmx11mmx4mm]

[5mmx14mmx5mm]

[10mmx30mmx9mm]

[5mmx13mmx4mm]

[7mmx19mmx6mm]

[8mmx19mmx6mm]

[9mmx20mmx6mm]

Description

NOTE：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.
These cost-effective bearings are widely used in areas with low requirements for hardness.
Single-row, pre-lubricated, normal accuracy.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: 608ZZ

Shield Type: Double Shield

Material:High Carbon Steel

Heat Treatment: Quenching

Hardness: HRC50-55

Cage Material: Stamping Steel

Inner Diameter: 8mm

Outer Diameter: 22mm

Thickness (B): 7mm

Dynamic Load Rating (Cr): 3.3kN

Static Load Rating (Cor): 1.35kN

Accuracy Class: P0 (ABEC1)

Noise Level: Z1

Number of Pack: 4 Pcs

Weight: 47g