This lamp has no color temperature memory function,color is not permanently selectable.Must cycle power switch every time to get desired color temp.
HOW To install,
1.Remove small screw on top and bottom of fixture to separate cast metal housing from sealed lens/LED light assembly.
2.Being a sealed assembly wiring connectes to your existing recessed wiring box,must be physically mounted using holes on four outer corners of fixture. The sealed fixture prevents accessing the mounting screw holes on the existing electrical box.all needed anchors and mounting hardware was included with the fixture.
3.When hooking up the wiring - the red wire on the fixture connects to your existing switched hot (typically black or red in your existing wall box), the black wire on the fixture is the neutral (typically the white wire in your wall box) and the yellow striped wire is the ground (typically the green or bare copper wire in your wall box). A sticker on the fixture wiring should identify this proper hook-up order.
HOW TO USE THE WALL LIGHT
After installing the lamp,first time,when you light on the lamp,it is showing the warm light,then cycling your wall switch controlling the light on and off one time, it will be change to cold white color,two times, it will change to natural color, third times will be coming original colors as the first time(warm white).