Feature

●Stable performance under different perssures ranges from 0.13bar to 16bar
●Toilet type: suitable for Split Toilet, as shown in Figure 6.
●Silicone seal water tablets, good sealing effect, never leaks
●Fits for drain diameter 60-78mm(2.36-3.07inch);two-piece float, momentary shut-off.
●The Inside of the Water Tank Height Should be 18-20cm (7.08inch-7.87inch) ;Measured should be From the Inside of the Water Tank.The size of this product is complicated, please check the size chart.
●Toilet Drain Valve: This is a great toilet tank inlet drain valve with exquisite workmanship and a great replacement accessory for you.


Description

Measurement and Installation Instruction for Toilet Drain Valve:

  1. Measure the height from the protuberance part in the toilet tank to the top of the tank(fit for 18-20cm). Since the height of the toilet is not standard,please measure it correctly.
  2. Measure the diameter of the installation hole,it will fit the hole with 6.0-7.8cm diameter.
  3. After confirming the height and diameter, please click the installation video to guide you to install it correctly.

Specification:

  • Brand name:RDEXP
  • Material:Plastic
  • Color:White
  • Size:approx 24.5 x 12 x 8.5cm/9.65 x 4.7 x 3.3"(L x W x T)
  • Height of Outlet Valve:18cm
  • Weight:346g

Feature:

  1. Double press water-saving type: Drain on demand.
  2. Split applicable drainage diameter: 60-78mm.
  3. Suitable for 18-20cm water tank.
  4. Improve your experience and save water; easy installation; please check the dimensions carefully.

Package Content:

  • 1 x Toilet Water Tank Fill Valve Set

22

Gasket

Silicone water-sealing film, good sealing effect, never leak.

33

Performance

The overall performance is good, and it is an ideal substitute for old and damaged water tanks in homes.

44

Water Level

Intuitively reflects the water level of the water tank.

55

Button

Blue and white button design to distinguish different displacements.

77

Toilet Bottom Inlet Fill Valve Split Push Button Dual Flush Cistern